{"title":"Repair Stands \u0026 Accessories","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eWork like a pro with Unior USA’s bicycle repair stands. From portable folding stands to heavy-duty electric lifts and wall-mount options, our shop-quality stands provide the stability and height you need for efficient bike maintenance.\u003c\/p\u003e","products":[{"product_id":"bikegator-bike-repair-stand","title":"Bike Gator Portable Repair Stand - 1693AS0-US","description":"\u003cp\u003eA travel mechanic at a race start, a club team service bay set up in the parking lot, a home garage where the stand has to disappear between jobs: these are the workflows the BikeGator was built for. The full stand folds down to 5.7 kg and packs into a duffel-bag-sized footprint, then sets up at the venue without tools. Despite the weight, it carries a 30 kg working load, which covers every bike you're realistically traveling with: road, gravel, hardtail, even most aluminum-framed downhill rigs.\u003c\/p\u003e\n\u003cp\u003eThe clamp options are the same heads we ship on our shop-floor 1693B stands: Manual Adjust Lever (cam-style, 24–40 mm tube range) or Pro Shop Clamp (quick-release, 22–60 mm range). Both clamps carry the replaceable rubber jaw covers (Unior 1693.11); the rubber wears, you replace just the rubber. The height adjusts between 980 mm and 1500 mm, so the stand works for mechanics from 5′2″ to 6′4″ without crouching or stretching.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe BikeGator is the entry into our portable line. The BikeGator+ family (1693AS, 1693A, 1693AQ) takes the same form factor and upgrades the sliding system, the jaw mount, and the precision aluminum + steel parts mix for higher-throughput shop floors that need a portable as a secondary stand. For most home and event-mechanic use, this base BikeGator is enough.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693AS0-US\u003c\/li\u003e\n\u003cli\u003eFolded weight: 5.7 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 980–1500 mm\u003c\/li\u003e\n\u003cli\u003eClamp options: Manual Adjust Lever (24–40 mm) or Pro Shop Clamp (22–60 mm)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eSetup: no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding stand body, choice of one clamp head, pre-installed rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. A portable stand is one of the harder design briefs in the catalog: it has to fold small, weigh nothing, set up in seconds, and still hold a 30 kg downhill bike without flexing. The BikeGator carries the team-mechanic field-service feedback that fed into the original design, and the same clamp heads we put on our shop stands.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eMost home mechanics buying their first stand start here, which is usually the right call: it gets out of the way when the work's done, and the price is friendlier than a shop-floor stand. The trade-off is rigidity, and once you're past one bike in regular service the math starts pointing toward a shop stand. The inflection-point conversation lives over in: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378799153196,"sku":"625148","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693as0-us.jpg?v=1642720491"},{"product_id":"pro-bike-repair-stand","title":"Single Arm Professional Repair Stand Manual Adjust Lever","description":"\u003cp\u003eA heavy bike clamped at the seatpost transfers every bump, lever pull, and torque-arm reaction into the floor through the stand's column. If the column flexes, the wrench misses its mark, and the rest of your tool kit stops earning its weight on the bench. The Single Arm Professional Repair Stand is the stand we built our shop floor around: 36 kg of base and column mass sitting under a 30 kg working load, so the rigidity reserve is there when you put your back into a stuck crank bolt or a seized pedal.\u003c\/p\u003e\n\u003cp\u003eThis is the manually adjustable single-clamp stand (1693BS-US). Turn the long jaw screw to set the opening for a 24–40 mm seatpost or tube, then the lever to lock; flip the same lever to release. Replaceable rubber jaw covers (Unior part 1693.11) ride on the clamp; when the rubber wears, you replace the rubber, not the clamp. The auto-adjust sibling is a separate product (1693B-US).\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693BS-US\u003c\/li\u003e\n\u003cli\u003eBase and column weight: 36 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eManual-clamp jaw range: 24–40 mm\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 985–1570 mm (max height 1700 mm)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e stand body with fixed plate, manually adjustable clamp head, and replaceable rubber jaw covers pre-installed.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 36 kg base-and-column mass under a 30 kg working capacity isn't a vanity number; it's the rigidity reserve that keeps the stand still when you bear down on a stuck pedal or a stripped fixing bolt. Cheaper stands save weight on the base and the customer pays for it later, when the column flexes on the first hard crank-puller pull.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThis stand's manual clamp is the fewer-moving-parts mechanism: you set the jaw opening with the long screw, then lock with the lever. If you want the auto-adjust head that closes around the tube without that pre-set, that is the separate 1693B-US stand. Both share the same 30 kg load and 36 kg fixed-plate column. If you want a deeper look at which workshop patterns each clamp fits: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the 1693BS-US manual clamp work?\u003c\/strong\u003e Turn the long screw on the clamp to set the jaw opening for the tube, then turn the lever until the jaw holds a 24–40 mm seatpost or frame tube. Flip the same lever to release, keeping a hand on the bike. Height is a separate lever on the column: release it, slide the top tube, and re-lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load and tube size does the 1693BS-US take?\u003c\/strong\u003e Official working load is 30 kg. The manual jaws fit tubes from 24 mm to 40 mm. The stand itself is listed at 36 kg, with a fixed plate 726 × 572 mm and a working height of 985–1570 mm (1700 mm max).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the 1693B-US auto-adjust stand?\u003c\/strong\u003e This SKU (1693BS-US, 625013) is the manual-adjust stand: you set jaw opening with the long screw. The 1693B-US is a separate product whose clamp auto-closes around the tube and is rated for a narrower 24–32 mm range. Both share the 30 kg load and the 36 kg fixed-plate column. Do not order this page if you want the auto head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the 1693BS-US stand ship?\u003c\/strong\u003e It is an oversized freight item, so it is not eligible for the free-shipping-over-$75 offer. Shipping is the carrier-calculated rate shown at checkout and is limited to the continental United States. If the rest of your cart would ship free, order the stand separately so the smaller items keep that option.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Manual Adjust Lever","offer_id":34378799185964,"sku":"625013","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693bs-us.jpg?v=1642729333"},{"product_id":"tool-tray-for-pro-bike-repair-stands-1693-series","title":"Tool Tray for Repair Stands - 1693.3-US","description":"\u003cp\u003eThe 1693.3-US Tool Tray is the SOS-foam-and-steel tray that mounts to the classic 1693 series shop stands; the Single Arm Pro, the Double Arm Pro, and the BikeGator portable family. A thin steel back-plate paired with the SOS-foam insert, sized for the bits, drivers, and small tools that come off the rack during a service session. Two steel arms mount the tray to pre-drilled holes on the stand's upright tubes; no column-collar required, no fold-out arm to swing into the work.\u003c\/p\u003e\n\u003cp\u003eWhere the column-mounted 1693EL accessory line (folding tool tray 1693EL.5, fixed tool tray 1693EL.7) is built around the electric stand's column geometry, the 1693.3-US is built around the manual stand line's upright tubes. The mount geometry is the difference; the SOS foam format and the metal back-plate are the same workshop-grade approach Unior carries across both stand families.\u003c\/p\u003e\n\u003ch2\u003eHow it mounts\u003c\/h2\u003e\n\u003cp\u003eThe two steel arms slot into mounting holes that come pre-drilled on the upright tubes of 1693-series stands manufactured after July 2014. No tools required for the mount itself once the arms are inserted; one stand, one tray. Shops running the 1693.16 collar accessory can add a second tray (or other column accessories) without modifying the stand's primary mount holes.\u003c\/p\u003e\n\u003cp\u003eThe SOS foam insert is the same foam format Unior uses across its tool-organization line: cutouts and slots that hold drivers upright, pliers in the open compartments, bits in their own row. When the foam wears (drilled into one too many times by the same Phillips bit), the insert is replaceable; the steel back-plate stays.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.3-US\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior 1693 series stands (Pro Shop and BikeGator) manufactured after July 2014\u003c\/li\u003e\n\u003cli\u003eConstruction: steel back-plate with SOS-foam insert\u003c\/li\u003e\n\u003cli\u003eMount: two steel arms, slot into pre-drilled holes on stand upright tubes\u003c\/li\u003e\n\u003cli\u003eFoam insert: replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e tool tray with SOS-foam insert, two steel mount arms.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693.3-US is one of those quiet accessories that disappears into the workflow once it's installed; the tools have a home that isn't the floor, the rolling drawer, or the cassette of the bike currently on the stand. The SOS-foam compatibility with the rest of Unior's tool-organization line is what lifts the tray above a generic shelf bracket.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe tool tray is a one-time install that pays back every time you reach for a tool without stepping away from the work. The trade-off versus a wall-mounted tool wall is reach radius; the tray sits at the bike, the wall sits at the wall. For shops where the stand is the workflow center (most mid-size shops), the tray is the right organizing surface. For shops where the wall is the workflow center (large shops with multiple stations), the tray is a redundant nice-to-have. Sizing the right stand first (single-arm, double-arm, portable) makes the tray decision automatic; the buying guide walks through that order of operations: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378799251500,"sku":"623820","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.3-us.jpg?v=1642731768"},{"product_id":"wall-and-bench-jaw-with-adjustable-nut-1693-2s-us","title":"Wall or Bench Mounted Repair Stand Cam Style Lever","description":"\u003cp\u003eSmall workshops and serious home garages run into the same problem at scale: a freestanding repair stand consumes square footage that a workshop layout has already allocated to something else. The Wall or Bench Mounted Repair Stand puts the clamp on the wall or the bench surface and keeps the floor clear. There's no base plate, no column footprint, and no stand to wheel out of the way when you need to mop or store a bike against the wall.\u003c\/p\u003e\n\u003cp\u003eThe cam-style lever head clamps tubes 24 to 40 mm in diameter, which covers every standard seatpost, top tube, and seat tube on modern road and mountain bikes. The clamp's center sits 240 mm out from the riser tube, so a typical bike mounted on a wall installation has full clearance for the handlebars and rear wheel to swing without contacting the wall behind. The riser tube bolts directly to a 2x6 stud, a workbench edge, or a workshop pillar; the install hardware is standard hex bolts sized to the mounting surface.\u003c\/p\u003e\n\u003ch2\u003eWhen this beats a freestanding stand\u003c\/h2\u003e\n\u003cp\u003eThe wall-or-bench variant earns its place in three scenarios: (1) a small shop where the floor space is committed to product display or seating; (2) a dedicated single-purpose station, e.g. tubeless setup or a fork-service bench, where the bike doesn't need to rotate or relocate; and (3) a serious home garage where the bike stays mostly assembled and the stand only sees occasional use.\u003c\/p\u003e\n\u003cp\u003eFor shops with high bike-to-bike throughput, the wall mount is too slow to switch between bikes; the floor space saved gets paid back in setup time. A freestanding stand stays the right choice for primary shop use.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693-2S-US\u003c\/li\u003e\n\u003cli\u003eClamp head: Manual Adjust Lever (cam-style) or Pro Shop Clamp (sold as separate variant)\u003c\/li\u003e\n\u003cli\u003eJaw range (cam): 24–40 mm\u003c\/li\u003e\n\u003cli\u003eStandoff from riser tube to clamp center: 240 mm\u003c\/li\u003e\n\u003cli\u003eMounting: bolt to wall stud, workbench, or workshop pillar (hardware not included; size to mounting surface)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e riser tube assembly, cam-style clamp head with pre-installed rubber jaw covers. Mounting hardware sourced to the install surface.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 240 mm standoff between the riser tube and the clamp center was set after measuring handlebar widths against wall-clearance in actual tour-vehicle workshops and small dealer service bays. The wall-mount variant came out of those workshops, not out of a marketing brief.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe wall-mount install is a workshop commitment: once the stand is bolted, that's where the bike goes. Whether that commitment is the right one for your shop comes down to your bike traffic and your floor-space math: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Cam-style Lever","offer_id":34378799284268,"sku":"625021","price":281.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.2s-us.jpg?v=1642732200"},{"product_id":"pro-road-stand-1693r","title":"Pro Road Stand - 1693R","description":"\u003cp\u003eModern road and gravel bikes don't always play nicely with traditional clamp-on repair stands. Thru-axle dropouts need an adapter to slot into a fork-mount, integrated cable routing makes a down-tube clamp risky, and aero seatposts come in shapes that a cam-style jaw was never sized for. The Pro Road Stand sidesteps all three problems with a frame-fitment design that supports the bike at the bottom-bracket area rather than clamping a tube, leaving the down tube, top tube, and seatpost untouched.\u003c\/p\u003e\n\u003cp\u003eAt 5.1 kg the stand is roughly 600 grams (1.3 lb) lighter than comparable portable stands from other brands, and it still carries a 27 kg (60 lb) working capacity. It was developed across two seasons with the World Tour outfit now riding as Ineos Grenadiers (Team Sky at the time), which is the kind of field-service feedback loop that drives weight out of a portable design. Through the \u003ca href=\"\/products\/thru-axle-adaptor-for-pro-road-stand\"\u003eThru-axle Adaptor 1693R.2\u003c\/a\u003e, the stand handles thru-axle road, gravel, and cross-country bikes without additional setup.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eOut of the box, the Pro Road Stand fits quick-release road and gravel bikes. The thru-axle adapter (sold separately) extends compatibility to modern road, gravel, and cross-country bikes with 12 mm thru-axles, including Boost rear spacing.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693R\u003c\/li\u003e\n\u003cli\u003eFolded weight: 5.1 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 27 kg (60 lb)\u003c\/li\u003e\n\u003cli\u003eMount: frame-fitment at the bottom-bracket area (not a tube clamp)\u003c\/li\u003e\n\u003cli\u003eThru-axle compatibility: via Thru-axle Adaptor 1693R.2 (sold separately)\u003c\/li\u003e\n\u003cli\u003eSetup: no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding stand body, frame-fitment mount, carry strap. Thru-axle adapter sold separately.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Pro Road Stand was developed in the team service-truck environment where stand weight matters, setup time matters, and integrated-cable-routing frames mean tube clamps are the wrong choice. The two-season co-development with the team mechanics shaped the frame-fitment geometry around the road-bike service workflow.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA frame-fitment stand changes the workflow on road and gravel bikes: rear-derailleur indexing reads differently when the rear wheel is free to spin without the stand fighting it, and brake-line routing isn't getting compressed under a clamp jaw. For shops doing rotor truing or brake bleeding on road bikes, the frame-area mount is the faster setup. When this kind of stand makes sense vs. when a tube-clamp is the better answer is the question we work through here: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378806788140,"sku":"627529","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693r.jpg?v=1642727790"},{"product_id":"pro-shop-clamp-1693-1q","title":"Pro Shop Clamp - 1693.1Q","description":"\u003cp\u003eThe clamp is the part of the stand a mechanic interacts with hundreds of times a day, so a clamp that saves a few seconds per bike swap pays itself back across a season. The Pro Shop Clamp does the saving on three details: a brass pressure handle that dials in tube grip without overtightening, a quick-release button that drops the jaw open without losing the pressure setting, and a 70 mm jaw height that's 25 mm shorter than a traditional cam clamp.\u003c\/p\u003e\n\u003cp\u003eThe 25 mm height difference is the spec that matters most often. Small road frames and any bike with a dropper post leave less seatpost exposed than the traditional cam clamp was originally sized for. The Pro Shop Clamp clears the dropper stanchion area on full-suspension bikes and gets a secure grip on the available seatpost on a small road frame, both of which the older cam clamp can struggle with.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Pro Shop Clamp drops onto the column of every freestanding shop stand in our line (1693B Single Arm Pro, 1693C Double Arm Pro, the floor-mount variant) and on the BikeGator+ portable family. The mounting collar is shared across the catalog; the upgrade from a cam clamp to the Pro Shop Clamp is a swap, not a stand replacement.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.1Q\u003c\/li\u003e\n\u003cli\u003eJaw range: 22–60 mm\u003c\/li\u003e\n\u003cli\u003eJaw height: 70 mm\u003c\/li\u003e\n\u003cli\u003ePressure handle: brass, threaded\u003c\/li\u003e\n\u003cli\u003eQuick-release: dedicated button (separate from pressure setting)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eCompatible with: 1693B, 1693C, 1693BS1, BikeGator+ family\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e clamp head with pre-installed rubber jaw covers, brass pressure handle, quick-release button assembly.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Pro Shop Clamp's brass handle is the kind of small material choice that separates a workshop tool from a consumer tool; brass holds pressure without thread-galling under repeated cycles and feels right in the hand on the thousandth bike of the season. The 70 mm height was set after mechanics flagged the older cam clamp's clearance on dropper posts and small road frames.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe Pro Shop Clamp is the fastest clamp in our line for high-throughput shops; the Master Shop Clamp is the more rigid clamp for shops running heavy e-bikes. The choice is real, and the right answer depends on your bike mix. A side-by-side comparison of the two clamps and how each plays with the different stand bodies: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378808852524,"sku":"627095","price":182.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.1q.jpg?v=1642727846"},{"product_id":"event-stand-1693f","title":"Event Stand - 1693F","description":"\u003cp\u003eA race-day mechanic service tent runs on a different rhythm from a shop floor: bikes arrive faster than a single clamp-on repair stand can cycle them, and the bikes waiting their turn need somewhere to go that isn't propped against a fence. The Event Stand is the bike-holding solution for that pattern. It's a modular bar that holds up to 10 bikes by the saddle in its full-length configuration, sets up in under a minute without tools, and packs into a carrying bag at the end of the day.\u003c\/p\u003e\n\u003cp\u003eThe short configuration is 1820 mm \/ 71 inches end-to-end and holds 4-5 bikes; the extension makes it 2630 mm \/ 103 inches and carries the full 10. The stand body is rigid enough that a 225 lb mechanic can lean on it without the bar sagging; we tested it. Total weight is 8.2 kg, which is light enough to single-hand into a support vehicle and back out at the next venue.\u003c\/p\u003e\n\u003ch2\u003eWhat this is and what it isn't\u003c\/h2\u003e\n\u003cp\u003eThe Event Stand is a bike holding line, not a repair stand. You don't wrench on bikes mounted to it; you hold them while they wait for the actual repair stand. The expected pattern is to pair the Event Stand with a single portable repair stand (the \u003ca href=\"\/products\/bikegator-bike-repair-stand\"\u003eBikeGator\u003c\/a\u003e or the \u003ca href=\"\/products\/pro-road-stand-1693r\"\u003ePro Road Stand\u003c\/a\u003e) so one mechanic can work the front of the line while up to 9 bikes queue up behind.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693F\u003c\/li\u003e\n\u003cli\u003eTotal weight: 8.2 kg\u003c\/li\u003e\n\u003cli\u003eShort configuration: 1820 mm (71 inches), 4–5 bikes\u003c\/li\u003e\n\u003cli\u003eFull configuration: 2630 mm (103 inches), up to 10 bikes\u003c\/li\u003e\n\u003cli\u003eModular aluminum construction with included extension\u003c\/li\u003e\n\u003cli\u003eSetup: no tools required\u003c\/li\u003e\n\u003cli\u003eIncludes carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e modular bar segments, extension, leg assemblies, carrying bag.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Event Stand exists because team mechanics at race starts asked for it: a fast-setup, single-bag, multi-bike holder that doesn't fight the limited tent space at the start of a stage. The modular bar is the shape that came out of that ask.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe Event Stand is the right call for race tents, group-ride support, and team-camp service bays where the constraint is bike-storage flow, not wrench throughput. Pairing it with a single portable repair stand turns one mechanic into a 50-rider event's worth of service capacity. Which portable to pair it with, and the rest of the decision tree if you're outfitting a service tent, sits in: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many bikes does the Event Stand hold?\u003c\/strong\u003e Up to 10 bikes, hung by the saddle, in the long configuration. With the connecting tube fitted the useful hanging area is 2090 mm; the short version gives 1260 mm. Overall length runs 1820 mm short to 2630 mm long.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to set up the Event Stand?\u003c\/strong\u003e No. The legs swing out and lock with quick-release levers, the bar halves and connecting tube are fixed with plastic-head bolts you tighten by hand, and the side leg connectors attach with push-button fittings. It packs back into the included carrying bag the same way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I repair bikes on the Event Stand?\u003c\/strong\u003e No. It is a holding stand: it hangs bikes by the saddle while they wait their turn, which keeps a race pit or group ride organized, but it has no clamp and does not hold a bike for wrenching. Pair it with a portable repair stand such as the BikeGator or the Pro Road Stand for the actual service work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the Event Stand ship?\u003c\/strong\u003e It is an oversized item, so it is not eligible for the free-shipping tier. It ships at the carrier-calculated rate shown at checkout and can only be delivered within the continental United States. If the rest of your cart qualifies for free shipping, ordering the stand separately keeps that option available for the smaller items.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378808983596,"sku":"625500","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693f.jpg?v=1642724345"},{"product_id":"double-sided-repair-stand","title":"Double Arm Professional Repair Stand Traditional Cam","description":"\u003cp\u003eTwo mechanics on the bench at peak hours need two clamp heads on a single base. The alternative is two separate stands, two separate floor footprints, and two mechanics negotiating elbow room around each other every time one needs to reach for a tool. The Double Arm Professional Repair Stand puts both clamps on one column so the shop floor stays sane during summer rush and the back-to-back work pattern stops costing you square footage.\u003c\/p\u003e\n\u003cp\u003eThe 56.5 kg combined weight gives a 45 kg total working capacity, which is enough headroom for two full-suspension e-MTBs clamped at once. Each clamp can carry the rated 22.5 kg without affecting the other; the column geometry handles the asymmetric loading from one wrench bearing down while the other is at rest. Both clamps offer the same choice (traditional cam-style or Pro Shop Clamp QR), and the two clamps don't have to match: a shop running road bikes on one side and e-bikes on the other can pair a Pro Shop Clamp head with a Master Shop Clamp head on the same stand.\u003c\/p\u003e\n\u003ch2\u003eCapacity and compatibility\u003c\/h2\u003e\n\u003cp\u003eThe cam-style clamps grip tubes 24–40 mm in diameter; the Pro Shop Clamp upgrade extends the range to 22–60 mm and shortens overall jaw height by 25 mm, which is what makes the difference on bikes with dropper posts and minimal seatpost exposed. Replaceable rubber jaw covers (Unior 1693.11) fit either clamp head.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693C-US (cam, both arms) \/ 1693C-US with Pro Shop Clamp options\u003c\/li\u003e\n\u003cli\u003eCombined weight: 56.5 kg\u003c\/li\u003e\n\u003cli\u003eTotal working capacity: 45 kg (22.5 kg per arm)\u003c\/li\u003e\n\u003cli\u003eClamp options per arm: Manual Adjust Lever (24–40 mm) or Pro Shop Clamp (22–60 mm)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e two-arm stand body, base, two clamp heads (configurable mix of cam and Pro Shop Clamp), pre-installed rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. A double-arm stand pays back the price difference in floor-space recovery over the first busy season: a single column under two clamps replaces what would otherwise be two single-arm stands' worth of footprint. Single-mechanic shops are usually better served by a second freestanding single-arm stand placed independently; two-mechanic shops at peak almost always settle on this layout.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe two-vs-one stand question is the most expensive layout decision a small shop makes. A second single-arm stand costs less and gives independent positioning; a double-arm stand consolidates floor space and pairs the two clamps under a single column. Which way to go depends on how many wrenches your shop runs at peak; that's the readable signal: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Traditional Cam-lever","offer_id":34378812784684,"sku":"625017","price":562.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693cs-us.jpg?v=1642724003"},{"product_id":"floor-stand-1693h","title":"Bicycle Display Stand - 1693H","description":"\u003cp\u003eA retail bike shop's display floor and a service shop's wheel-zone both need the same thing: a way to park a bike upright, between the rider's drop-off and the mechanic's pickup, without taking the floor space of a repair stand. The Unior Bicycle Display Stand 1693H is an adjustable stainless-steel floor stand for the garage, shop floor, or living room; a compact, height-adjustable cradle sized for everything from a kid's bike to a 29+ MTB.\u003c\/p\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe 1693H holds a bike by the rear axle rather than the seatpost. The rubber layer protects the frame against scratches, and the slot is wide enough to accommodate all popular rear axle dimensions. The top part adjusts 123 mm in height and also in angle, enough to span from a kid's bike to a 29+ mountain bike.\u003c\/p\u003e\n\u003ch2\u003eWhen it pays back\u003c\/h2\u003e\n\u003cp\u003eThree retail-and-service workflows where the 1693H pays back:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetail display floor.\u003c\/strong\u003e A customer's drop-off bike parks alongside the for-sale inventory without competing for repair-stand floor space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-receiving zone.\u003c\/strong\u003e The bike comes in, gets weighed in, and parks on the 1693H until a mechanic is free to pull it to the repair stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel-zone parking.\u003c\/strong\u003e Between a wheel truing and the next bike's headset service, the bike parks here rather than on the repair stand.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor shops actively servicing a bike (repair, not parking), the \u003ca href=\"\/products\/electric-repair-stand-2-0\"\u003eElectric Repair Stand 2.0\u003c\/a\u003e and the manual pro-stand range are the right tools. The 1693H is the \u003cem\u003ebetween-stands\u003c\/em\u003e parking solution.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693H. SKU 626542. Stainless steel, black finish. Base 252 × 200 mm. Height 284–407 mm. Weight 1787 g. Lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 123 mm range, plus angle.\u003c\/li\u003e\n\u003cli\u003eFrame protection: rubber layer on the slot to prevent scratches.\u003c\/li\u003e\n\u003cli\u003eFloor protection: rubber inserts on the base that prevent movement and protect the floor.\u003c\/li\u003e\n\u003cli\u003eAxle compatibility: slot wide enough for all popular rear axle dimensions.\u003c\/li\u003e\n\u003cli\u003eBike range: kid's bicycles to 29+ mountain bikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e this is a display and storage stand, not a clamp-style workstand. Unior publishes no per-axle millimetre list and no kilogram weight cap; official coverage is kid's bicycles through 29+ mountain bikes, with a slot that takes all popular rear axle dimensions.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693H is Unior's adjustable floor display stand: stainless steel, black finish, rubber-protected rear-axle slot, lifetime warranty.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe 1693H is one of those tools that doesn't pay back on day one, but a retail-plus-service shop with four-plus bikes parked at any given time notices its absence within a month. The decision is rarely “buy or skip”; it's “how many do we need” (typically two or three in a high-traffic retail-plus-service shop). The 1693H is a complement to the repair stand, not a substitute; the buying guide opens with the stand-archetype decision the parking-stand sits next to: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 1693H a repair stand I can work on a bike in?\u003c\/strong\u003e No. The 1693H is Unior's adjustable display stand (official category: bike storage). It parks a bike upright on the garage, shop, or living-room floor by a rear-axle slot. The front wheel stays on the floor. For service work you want a clamp-style repair stand; this one is the parking and display tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bikes and rear axles does the 1693H fit?\u003c\/strong\u003e Unior rates it for kid's bicycles through 29+ mountain bikes. The slot is officially wide enough for all popular rear axle dimensions. Unior does not publish a QR \/ 12 mm \/ 15 mm millimetre list for this stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the 1693H adjust, and how big is it?\u003c\/strong\u003e The top part adjusts 123 mm in height and also in angle. Official dimensions: base 252 × 200 mm, height 284–407 mm, additional length 267–390 mm, 1787 g. Stainless steel, black finish, rubber layer on the slot, rubber inserts on the base. Article 1693H, SKU 626542, lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 1693H have a published weight limit?\u003c\/strong\u003e No kilogram cap is published. Unior's official line is that the stainless-steel stand offers great stability regardless of the bicycle's weight. The 50 lb \/ 22.5 kg figure that appears next to it in some catalogues is the 1684 ceiling bike lift, not this stand.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378814062636,"sku":"626542","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693h.jpg?v=1642723925"},{"product_id":"replacement-clamp-jaw-covers-1693-11","title":"Replacement Clamp Jaw Covers 70mm","description":"\u003cp\u003eReplaceable rubber jaw covers are the wear part on every Unior stand clamp; the rubber takes the daily grip-and-release work, picks up grit and frame cleaner residue, and eventually wears thin or tears at a corner. The 70 mm Replacement Clamp Jaw Covers (Unior 1693.11) are the cover size sized for the \u003cstrong\u003ePro Shop Clamp 1693.1Q\u003c\/strong\u003e and the older 1693.1 \/ 1693.1S cam-style clamps with the 70 mm jaw height.\u003c\/p\u003e\n\u003cp\u003eWhen the rubber wears, you replace the rubber; the clamp itself stays. The covers slip onto the existing jaws without tools and lock into the same retention geometry the original factory covers used. The clamp goes from “showing its age” to “freshly bedded” in the time it takes to swap them in.\u003c\/p\u003e\n\u003ch2\u003eWhy fresh covers matter\u003c\/h2\u003e\n\u003cp\u003eA worn jaw cover doesn't grip the frame tube the way a fresh one does. The rubber compound is the surface that holds the bike under torque; once the rubber is glazed, hardened by frame cleaner, or torn through to the metal beneath, the clamp's hold on the bike is compromised. For carbon frames, an over-tightened clamp on worn covers is the failure mode that ends with a cored seat tube; for aluminum frames, it's the route to a clamp-shaped dent. Fresh covers protect both the bike and the clamp.\u003c\/p\u003e\n\u003ch2\u003eSizing: confirm before you order\u003c\/h2\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e70 mm cover\u003c\/strong\u003e sized for clamps with the 70 mm jaw height. Two other cover sizes are available for different Unior clamp variants:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 mm covers\u003c\/strong\u003e fit the older square-style jaws on 1693.1 \/ 1693.1S clamps with the 90 mm jaw height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e57.2 mm covers\u003c\/strong\u003e fit the Master Shop Clamp (1693.1M) with the shorter round-jaw geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMeasure your existing covers (or the bare jaw, if your stand is running with a shop rag in place of covers) before ordering; the three sizes are not cross-compatible.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.11 (70 mm variant)\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior Pro Shop Clamp 1693.1Q (70 mm jaw); older 1693.1 \/ 1693.1S clamps with 70 mm jaws\u003c\/li\u003e\n\u003cli\u003eSold as: a pair (one set covers one clamp head)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e pair of 70 mm replacement rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693.11 covers are the consumable on a Pro Shop Clamp's daily life: every bike that goes on the clamp leaves a small mark on the rubber, and every shop rag wipe of the rubber accelerates the wear. Fresh covers from the same factory the clamp shipped from, sized to the 70 mm jaw the clamp was designed around.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eWe've watched shops use a shop rag as a jaw cover for years past the point a fresh set of covers would have paid back. The rag-on-jaw fix tells the customer everything they need to know about the rest of the shop's tool standards; fresh covers cost less than a single drink-of-bottled-water tab on a takeout order. Buy them when the originals look tired, not when they fail. Shopping for the clamp head itself rather than the covers? The cam-versus-QR decision lives in the buying guide: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"70mm","offer_id":34378822647852,"sku":"627266","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.11.jpg?v=1642728454"},{"product_id":"stationary-pro-road-stand","title":"Shop Pro Road Stand - 1693RP","description":"\u003cp\u003eThe Shop Pro Road Stand (1693RP) is the road-mechanic's stationary answer: the same Pro Road Stand geometry that travels in team service trucks, anchored to a 30 kg steel base plate sized for shop use. Where the 5.1 kg Pro Road Stand (1693R) trades stability for portability, the 1693RP trades portability for the rigidity a workshop bench needs when an aero-road or TT bike is on the stand for a full fit session.\u003c\/p\u003e\n\u003cp\u003eThe road-specific stand mounts the bike at the bottom-bracket area rather than clamping a frame tube. The mount geometry was developed in coordination with the team service mechanics now riding as Ineos Grenadiers, where the trade-off was clear: deep aero seatposts and TT-bike geometry are the wrong shape for a clamp-style stand, so the stand had to support the bike from the cockpit-area instead. The 1693RP keeps that mounting approach and pairs it with a base mass heavy enough that the stand doesn't drift while the mechanic dials in a saddle position or torques an integrated cockpit.\u003c\/p\u003e\n\u003ch2\u003eAdjustments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e scales from a 5′0″ mechanic working at hip height to a 6′5″ mechanic working at chest height without crouching or stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFore-aft:\u003c\/strong\u003e dials in the bike's stand position relative to the mechanic's bench reach. Useful for shop layouts where the stand sits in a fixed position relative to a wall or a tool wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX-axis rotation:\u003c\/strong\u003e at the column, frees up working space in cramped service bays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-axis rotation:\u003c\/strong\u003e at the bike support, swings the bike for back-side access without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eY-axis rotation:\u003c\/strong\u003e at the bike, lets the mechanic access the bike's underside for cable routing or hidden-brake service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe five adjustment axes are why the 1693RP works for fit sessions and aero-bike service the way the standard tripod stand doesn't; the bike can be presented to the mechanic in whatever orientation the job needs.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693RP\u003c\/li\u003e\n\u003cli\u003eBase plate: 30 kg steel\u003c\/li\u003e\n\u003cli\u003eWorking capacity: 27 kg (60 lb)\u003c\/li\u003e\n\u003cli\u003eBike mount: bottom-bracket-area, road and gravel\u003c\/li\u003e\n\u003cli\u003eAdjustments: height, fore-aft, X, Y, and Z rotation\u003c\/li\u003e\n\u003cli\u003eThru-axle adaptors (sold separately) extend compatibility to thru-axle bikes\u003c\/li\u003e\n\u003cli\u003eDesigned in coordination with team service mechanics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e stand assembly, 30 kg steel base plate, mount hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Pro Road Stand line is one of the catalog items most directly shaped by team-mechanic feedback; the bottom-bracket-area mount was a response to a specific problem (the aero-seatpost-versus-frame-clamp incompatibility), and the 1693RP is what happens when the same mount takes its place in a shop bay rather than a service truck.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe 1693RP is the right call for road-only or road-plus-gravel shops where the mix is enough TT and aero bikes that a clamp-style stand becomes the constraint. For shops doing mixed-bike service (road, mountain, e-bike), the standard 1693 single-arm stand with a Pro Shop Clamp covers the mix and the 1693RP is overkill. The five-axis adjustability is what justifies the 1693RP's premium over the tripod stand: if you're doing a lot of fit work or aero-bike service, those axes pay back; if not, they're parked. Sizing the right stand for your shop's actual mix is the upstream decision; the buying guide makes it concrete: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378823106604,"sku":"628353","price":735.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693RP_73f08690-db78-46fa-b38e-88c051d11bd3.png?v=1624372338"},{"product_id":"thru-axle-adaptor-for-pro-road-stand","title":"Thru-axle Adaptor for 1693R Pro Road Stand - 1693R.2","description":"\u003cp\u003eThru-axle road bikes and gravel bikes don't fit the original 1693R Pro Road Stand mount geometry, which was designed around the QR-skewer fork-end interface of the 2010s road bike. The 1693R.2 Thru-axle Adaptor is the bolt-on extension that takes the same Pro Road Stand and makes it the right stand for modern thru-axle road, gravel, cross-country, and TT bikes.\u003c\/p\u003e\n\u003cp\u003eThe adapter clamps over the support beam of the Pro Road Stand and grips the bike's thru-axle directly. The geometry presents the bike to the mechanic the same way the QR mount does: bottom-bracket-area support, five-axis adjustability for fit work, no clamp on a frame tube. The adapter is welded steel and sized to take meaningful working load without slipping or flexing under the mechanic's pry on a stuck axle or a tight headset.\u003c\/p\u003e\n\u003cp\u003eA practical detail that matters once the adapter is in the shop: the adapter can live on the stand alongside the QR-skewer mount. Loosen the underside fixing bolt, slide the adapter out of the way; tighten when you need it back. Shops doing mixed-axle work (a vintage road bike on QR, the next bike a thru-axle gravel rig) don't have to choose at the start of the day which mount to fit; both ride the stand together.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThru-axle diameters: 12 mm and 15 mm.\u003c\/li\u003e\n\u003cli\u003eStand fit: 1693R Pro Road Stand series (1693R, 1693RP, 1693RP1).\u003c\/li\u003e\n\u003cli\u003eBike types: thru-axle road, gravel, cross-country, TT, and disc-brake road bikes with thru-axle forks.\u003c\/li\u003e\n\u003cli\u003eCoexists with the QR-skewer mount on the same stand; loosen the underside bolt to slide between configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693R.2\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel\u003c\/li\u003e\n\u003cli\u003eThru-axle compatibility: 12 mm and 15 mm\u003c\/li\u003e\n\u003cli\u003eMount: clamps over the Pro Road Stand support beam\u003c\/li\u003e\n\u003cli\u003eDesigned to remain on the stand alongside the QR mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e thru-axle adapter assembly, fixing hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693R.2 is the kind of adapter that exists because the Pro Road Stand has held its design long enough that the bikes around it changed; the QR skewer used to be the road-bike interface, and now the thru-axle is. The adapter is what makes the stand still the right tool a decade after a fork-end standard shifted.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eMost shops doing road work today see thru-axle as the default and QR-skewer as the exception, which means the 1693R.2 isn't really an accessory anymore; it's the working mount for most bikes. Order it with a new 1693R, 1693RP, or 1693RP1; for shops already running an older stand, it slides onto the beam without modification. The thru-axle adoption arc and the road-stand-versus-tripod-stand question both come up in the same conversation: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":34378824646700,"sku":"628710","price":125.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693r.2_cf89ce03-34ae-48c9-a5c9-a3cec69020df.png?v=1610401266"},{"product_id":"single-arm-pro-repair-stand-floor-mount","title":"Single Arm Pro Repair Stand, Floor Mount - 1693BS1-US","description":"\u003cp\u003ePermanent workshop installs are a different decision from buying a stand. The base plate that gives a freestanding stand its stability is dead weight once the column is bolted to the floor: it consumes floor space that a wall, a tool tray, or a second stand could use better. The Single Arm Pro Repair Stand, Floor Mount strips the base plate from the 1693BS Pro Repair Stand and ships you the column-and-clamp side only, ready to anchor directly to a concrete or hardwood shop floor.\u003c\/p\u003e\n\u003cp\u003eThe stand body, the riser tube, the clamp, the height adjustment, and the jaw covers are all identical to the 1693BS we sell with a base plate. The Manual Adjust Lever and Pro Shop Clamp options carry over; so do the replaceable rubber jaw covers (Unior 1693.11). What you give up is portability and quick relocation. What you gain is a stand that doesn't shift under a hard pedal-pull, a clear floor under and around the column, and a permanent location for your tool tray, parts bin, or laptop holder.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Floor Mount variant uses the same column geometry as the 1693BS, so accessories built for the standard Pro Repair Stand drop on without adapters: the \u003ca href=\"\/products\/tool-tray-for-pro-bike-repair-stands-1693-series\"\u003e1693.3-US Tool Tray\u003c\/a\u003e, the 1693.16 Tool Tray Collar, the replaceable jaw covers, and either clamp head.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693BS1-US\u003c\/li\u003e\n\u003cli\u003eColumn geometry: identical to 1693BS\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eClamp options: Manual Adjust Lever or Pro Shop Clamp (both work on the same column)\u003c\/li\u003e\n\u003cli\u003eMounting: anchor bolts to floor (bolts not included; size to the slab)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e column, riser tube, height-adjust mechanism, choice of clamp head with rubber jaw covers pre-installed. Base plate is intentionally not included on this variant.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. A floor-mounted stand is a workshop permanence decision; we make the 1693BS1 because the calls we get from shops that already own the freestanding version are almost always to ask whether they can buy the column on its own. The answer is yes, and the column is the same column.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA permanent floor mount changes the workshop geometry; once the stand is bolted, the tool tray, parts bin, and lighting can all be located relative to it instead of moved with it. The freestanding-vs-floor-mount decision is the one most shops make wrong on the first try; here's how to think about it: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default","offer_id":34867169361964,"sku":"625014","price":398.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693bs1-us.jpg?v=1642729405"},{"product_id":"1693el-11-height-extension-kit-for-1693el","title":"Height Extension Kit for 1693EL - 1693EL.11","description":"\u003cp\u003eThe 1693EL Electric Repair Stand 2.0 raises the bike's clamp from 240 mm at the lowest setting to 1750 mm (~1.75 m) at the highest, which covers nearly every working-height preference a mechanic might have. For a 6′3″ or 6′5″ mechanic working on a tall cargo e-bike, that ceiling occasionally sits just below the comfortable working height for the cockpit; the bike could go up another 25 cm and the back would thank you. The 1693EL.11 Height Extension Kit is the bolt-on column extender that raises the stand's maximum height by an additional 250 mm.\u003c\/p\u003e\n\u003cp\u003eThe use case is narrow on purpose; most shops don't need it. The extension is the right buy in two specific configurations: tall mechanics whose neutral working height is above the stock 1.75 m ceiling, and shops servicing tall-cargo or extra-long-wheelbase e-bikes where the bottom-bracket-area sits at handlebar height on a stock stand.\u003c\/p\u003e\n\u003ch2\u003eV2 stand compatibility\u003c\/h2\u003e\n\u003cp\u003eThe 1693EL.11 is the \u003cstrong\u003eV2-only\u003c\/strong\u003e height extension kit. Per Unior corporate: \u003cem\u003e“this kit is only compatible with the later revisions of the 1693EL that have an aluminum column. The first production run, with a steel column, is not compatible with this kit.”\u003c\/em\u003e The V2 aluminum column accepts the extension geometry; the V1 steel column doesn't.\u003c\/p\u003e\n\u003cp\u003eIf you're not sure which generation your stand is, the visual tells: V2 has a smooth aluminum column with internal wiring (no external cable runs) and two USB ports (one A, one C) on the control panel. V1 has a textured-paint steel column with external cabling and no USB. Stands shipped to US shops after mid-2021 are typically V2.\u003c\/p\u003e\n\u003ch2\u003eWhat it does\u003c\/h2\u003e\n\u003cp\u003eThe kit adds 250 mm to the stand's stroke ceiling, raising the maximum from 1750 mm to 2000 mm. The travel-limit memory, the load display, and the rest of the V2 control electronics work unchanged with the extension installed; the extension is mechanical column hardware, not an electronics upgrade.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.11\u003c\/li\u003e\n\u003cli\u003eAdded column height: 250 mm (25 cm)\u003c\/li\u003e\n\u003cli\u003eNew maximum stand height: 2000 mm (2.0 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV2 stands only;\u003c\/strong\u003e not compatible with V1 (pre-April 2021)\u003c\/li\u003e\n\u003cli\u003eMechanical column extension; no electronics modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e column extension hardware, mount fasteners, install instructions.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693EL.11 is the V2 column's ergonomic upgrade for the long install: 250 mm of additional working stroke that a shop can add years after the original purchase without retiring the stand. The aluminum column was designed to accept this kind of extension; the V1 steel column wasn't, which is why the kit's compatibility is generation-specific.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe honest test for the height extension is whether you currently lift the bike to within the last 50 mm of the stock 1.75 m ceiling on a regular working day. If yes, the extension is worth ordering; if no, the stock height is the right ceiling and the extension is parked accessory inventory. Tall mechanics tend to learn this within a week of installing the stand; tall-cargo specialists usually know before they uncrate it. If you're still sizing the stand itself rather than the extension, the buying guide covers the electric-versus-manual decision before the height-ceiling question becomes relevant: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":39531332665388,"sku":"629165","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.11.jpg?v=1629296918"},{"product_id":"master-shop-clamp","title":"Master Shop Clamp - 1693.1M","description":"\u003cp\u003eHeavy e-bikes changed what a workshop clamp has to do. A 25 kg full-suspension e-MTB clamped at the seatpost is moving an order of magnitude more mass than the road bikes the older clamp generation was sized for, and the jaw geometry that worked on a 7 kg road bike doesn't grip the same way under e-bike load. The Master Shop Clamp is our 2021 redesign for that load profile: shorter jaws, wider opening, and a simpler mechanism that drops the quick-release in exchange for the rigidity that a heavier bike demands.\u003c\/p\u003e\n\u003cp\u003eThe jaws are 5 cm (~2 inches) tall, which is short enough to bite securely on bikes with very little exposed seatpost: modern aero road frames, most full-suspension e-MTBs, and the trail-bike category that keeps shrinking seatpost exposure year over year. The jaws open to 110 mm, wide enough for the deepest aero seatpost shapes coming out of the wind-tunnel-shaped frame designs of the last few seasons. The replaceable rubber jaw covers (Unior 1693.11) carry over from our other clamp heads.\u003c\/p\u003e\n\u003ch2\u003eWhat's different from the Pro Shop Clamp\u003c\/h2\u003e\n\u003cp\u003eThe Master Shop Clamp removed the quick-release button on purpose. The QR mechanism is a small reliability liability under heavy cycling load, and shops handling e-bikes care more about long-cycle reliability than they do about bike-to-bike swap speed. A road-focused shop running fast tune-ups and pad swaps is still better served by the \u003ca href=\"\/products\/pro-shop-clamp-1693-1q\"\u003ePro Shop Clamp 1693.1Q\u003c\/a\u003e; an e-bike-heavy or DH-heavy workshop is the Master Shop Clamp's target.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Master Shop Clamp drops onto the same column mount as the Pro Shop Clamp, so any 1693B, 1693C, 1693BS1, or BikeGator+ stand can upgrade to the Master Shop Clamp head without replacing the column.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.1M\u003c\/li\u003e\n\u003cli\u003eJaw height: 5 cm (~2 inches)\u003c\/li\u003e\n\u003cli\u003eJaw opening: 22–110 mm\u003c\/li\u003e\n\u003cli\u003eMechanism: pressure handle only (no quick-release)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eCompatible with: 1693B, 1693C, 1693BS1, BikeGator+ family\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e clamp head with pre-installed rubber jaw covers, pressure handle.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Master Shop Clamp's 2021 redesign came directly out of the working reality of heavy e-bikes coming off the factory truck and onto the bench. The jaw shortening and the opening widening were both decisions about \u003cem\u003ewhich bike the clamp has to hold\u003c\/em\u003e, and the e-bike question answered them.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe clamp-choice decision is the most consequential clamp-buying question we hear, and it isn't a one-clamp-fits-all answer. Where each clamp wins, broken down by workshop bike mix: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":39938843803692,"sku":"629164","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/Master-Shop-Clamp---1693.1M.jpg?v=1732186300"},{"product_id":"set-of-spare-parts-for-1693-1q-1693-1q-sp-1","title":"Rebuild Kit for 1693.1Q Pro Shop Clamp - 1693.1Q-SP.1","description":"\u003cp\u003eThe Pro Shop Clamp 1693.1Q lives the same daily life as a shop's most-used tool: thousands of bike-to-bike cycles, hundreds of lever-actuated open-and-closes, and the slow accumulation of grit and dried-frame-cleaner residue in the ratchet mechanism. The Rebuild Kit for the 1693.1Q is the service item that resets the clamp's ratchet to like-new without replacing the entire clamp head.\u003c\/p\u003e\n\u003cp\u003eIf the QR ratchet has started to slip, ghost-grip, or feel notchy as it engages, the spares kit is usually the right answer before the next step (replacing the clamp head outright). The kit ships with the wear-prone internals of the ratchet mechanism: the parts that take the cyclic load every time a mechanic works the QR.\u003c\/p\u003e\n\u003ch2\u003eWhen to use it\u003c\/h2\u003e\n\u003cp\u003eTwo signs the clamp is asking for the rebuild kit rather than a full replacement:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe QR release feels notchy or grabbing rather than smooth.\u003c\/strong\u003e The ratchet pawl spring or pawl face is worn; the rebuild kit's spring and pawl restore the smooth release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe clamp doesn't hold pressure between bikes.\u003c\/strong\u003e The pressure-set mechanism has drifted; the rebuild kit's internals reset the mechanism to its factory tolerance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf the clamp jaws themselves are cracked, the body is bent, or the QR button stem is stripped, the issue is past the rebuild kit's scope; replace the clamp head with a new 1693.1Q.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the Unior Pro Shop Clamp 1693.1Q on Single Arm Pro Stands, Double Arm Pro Stands, and BikeGator+ Pro Shop QR portable stands. The rebuild kit is specific to the 1693.1Q quick-release mechanism; cam-style clamps (1693.1S, 1693.1) use a different mechanism and aren't covered.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.1Q-SP.1\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior Pro Shop Clamp 1693.1Q (all stands)\u003c\/li\u003e\n\u003cli\u003eScope: ratchet mechanism internal wear parts\u003c\/li\u003e\n\u003cli\u003eService interval: as needed, when the QR mechanism shows wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e rebuild-kit parts set for the 1693.1Q QR mechanism.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693.1Q rebuild kit reflects the same long-service-life design assumption that runs through the rest of Unior's catalog: parts wear, the wear-prone parts are user-serviceable, and the rebuild kit costs a fraction of the clamp head replacement. The clamp is designed to outlive a workshop's first decade; the rebuild kit is what makes that outcome the typical one rather than the exception.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA QR clamp that's slipping under a heavy bike is the clamp asking for service, not the clamp asking to be retired. The rebuild kit is a fifteen-minute swap that restores the original feel. Shops running the 1693.1Q in daily service usually go through one rebuild kit every five to seven years of heavy use; lighter use, more like a decade. If you're shopping the QR clamp for a new stand rather than rebuilding an existing one, the buying guide compares the Pro Shop QR against the cam-style alternative directly: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default","offer_id":40173035618348,"sku":"628969","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.1q-sp.1.png?v=1648670476"},{"product_id":"repair-stand-tool-tray-collar-1693-16","title":"Repair Stand Tool Tray Collar - 1693.16","description":"\u003cp\u003eThe Repair Stand Tool Tray Collar 1693.16 is the add-a-mount-point accessory that lets a single 1693 series shop stand carry a second tool tray, a parts organizer, or another column-mountable accessory beyond the one mount point the stand ships with. The collar clamps around the stand's upper sliding tube and locks with a quick-release lever, so the second mount can be raised, lowered, or repositioned to suit the day's work.\u003c\/p\u003e\n\u003ch2\u003eWhat it solves\u003c\/h2\u003e\n\u003cp\u003eEvery 1693 series stand comes set up to carry one tool tray (1693.3-US). That's enough for most home garages and most one-tool-tray service workflows. The 1693.16 collar is the answer for shops that have grown into a workflow where one tray isn't enough, and the second tray or parts organizer needs its own place on the stand. The collar mounts the addition at whatever height and position the mechanic chooses, then locks in place with the QR lever; no drilling, no modification of the stand itself.\u003c\/p\u003e\n\u003ch2\u003eHow it mounts\u003c\/h2\u003e\n\u003cp\u003eFitting the collar is a one-time, drill-free job: open the stand's upper quick-release lever, loosen the two M6 hex bolts, and pull the upper sliding tube out of the frame. The collar, its plastic bushing, and its metal cover slide onto the tube past the bottom-out rivet, and four M3 bolts fix the cover to the collar. The tool tray or other accessory then slots straight into the collar. To reposition, release the lever, slide, lock again. Removal reverses the install, so it makes sense to leave the collar mounted and use the lever for day-to-day height changes.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits all Unior 1693 series classic shop stands manufactured after July 2014. That covers the Single Arm Pro Stand, the Double Arm Pro Stand, and the BikeGator portable family. The collar is not used on the 1693EL Electric Repair Stand (which has its own column-mount accessory line).\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.16 (SKU 629065); weight 173 g\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior 1693 series stands manufactured after July 2014\u003c\/li\u003e\n\u003cli\u003eMount: slides onto stand upper sliding tube; quick-release lever locks position\u003c\/li\u003e\n\u003cli\u003eAccessory interface: accepts the 1693.3-US tool tray and other stand accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e tool tray collar with quick-release lever, plastic bushing, metal cover, and four M3 fixing bolts.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The collar is the kind of catalog item that exists because the stand is a long-lived workshop fixture; the workshop grows around the stand, and the stand's accessory load grows with it. The collar lets the stand carry more without requiring drill-and-modify changes to the stand body, which is the practical benefit of buying accessories from the same maker as the stand.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe collar is a low-cost accessory that buys real workflow margin once you're past one tool tray. In our experience shops reach for it once the original tray has filled up and the natural next move is a second mount surface. The 1693-series stand the collar bolts to is a long-term workshop investment; the buying guide covers the manual-versus-electric and single-versus-double-arm decisions if you're sizing the stand first: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich repair stands does the 1693.16 collar fit?\u003c\/strong\u003e It fits every Unior 1693 series classic repair stand made after July 2014, which covers the single-clamp and double-clamp Pro stands and the BikeGator family. It is not used on the 1693EL electric stand, which has its own accessory line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tool tray included with the collar?\u003c\/strong\u003e No. The box holds the collar with its quick-release lever, a plastic bushing, a metal cover, and four M3 fixing bolts. The tray is sold separately; the collar accepts the same 1693.3-US tool tray the stand carries on its standard mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installing the collar mean drilling or modifying the stand?\u003c\/strong\u003e No drilling and no permanent changes. You open the upper quick-release lever, loosen the two M6 hex bolts, and pull the upper sliding tube out of the frame; the collar, bushing, and metal cover slide on past the bottom-out rivet, the cover screws to the collar with the four M3 bolts, and the tube goes back in the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I move the collar after it is installed?\u003c\/strong\u003e Yes, without tools. Open the quick-release lever, slide the collar to whatever height on the upper tube suits the job, and close the lever to lock the mount in place.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389569118252,"sku":"629065","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.16_629065_image_1024.png?v=1654696516"},{"product_id":"fixed-tool-tray-for-1693el-1693el-7","title":"Frame mount tool tray for 1693EL - 1693EL.7","description":"\u003cp\u003eIn a dedicated e-bike bay running V1-generation 1693EL stands, the tools that go on the tray are the same tools day after day. The job profile doesn't change; the tools cycle through the same arc; the tray doesn't need to fold out of the way at the end of a shift. The 1693EL.7 Fixed Tool Tray is the static-mount version of the column-mounted tool tray; a thin metal plate plus SOS foam insert, mounted directly to the column without a folding arm.\u003c\/p\u003e\n\u003ch2\u003eV1-stand compatibility\u003c\/h2\u003e\n\u003cp\u003eThe 1693EL.7 is the \u003cstrong\u003eV1-only\u003c\/strong\u003e tool tray. It mounts to the V1 column geometry and is not compatible with V2 1693EL stands (April 2021 onward). The fixed-mount bracket geometry is matched to the V1 steel column profile; the V2 aluminum column's slightly different cross-section means the V1 bracket doesn't seat correctly on a V2 stand. If you're running a V2 stand, the folding-arm 1693EL.5 is the option that covers the tool-tray case for V2 (and also retro-fits a V1 stand if you'd rather have folding-arm flexibility).\u003c\/p\u003e\n\u003cp\u003eThat makes the 1693EL.7 either the right answer or no answer at all, depending on which generation of stand is in your bay. Check the version of your 1693EL before ordering: V1 stands have an external cable run and a textured-paint steel column; V2 stands have a smooth aluminum column with internal wiring and two USB ports on the control panel.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eThe tray is a thin metal plate paired with an SOS foam insert. The foam has cutouts for drivers, screwdrivers, pliers, and bits; the same foam format Unior uses across its tool-organization line. The tray sits close to the stand column, in a fixed position; you load it once with the tools you reach for during an e-bike service, and they stay there. No folding, no rotation, no arm to swing into anyone's path.\u003c\/p\u003e\n\u003cp\u003eThe trade-off versus the folding 1693EL.5: the fixed tray doesn't pull out over the bike, which means the tools sit at column distance from the work; a fingertip-and-thumb reach rather than a single hand grab. For dedicated e-bike service bays that's the right exchange; the tools are where you left them, and the muscle memory builds up faster.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.7\u003c\/li\u003e\n\u003cli\u003eFixed tool tray for the Unior 1693EL Electric Repair Stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV1 stands only;\u003c\/strong\u003e not compatible with V2 (April 2021 onward)\u003c\/li\u003e\n\u003cli\u003eThin metal plate with SOS foam insert (slot-format tool storage)\u003c\/li\u003e\n\u003cli\u003eMounts directly to the column; no folding arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e tool tray with SOS foam insert, fixed-mount bracket hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The fixed-mount design of the 1693EL.7 reflects an older generation of the stand's accessory thinking; the column geometry on the V1 stand was straightforward enough that a hard mount was the better answer than an arm, and the V1-era accessory line carries that decision through. The V2 column changed the bracket interface, which is why the 1693EL.7 doesn't fit the newer stands and the 1693EL.5 took over for the folding case.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe most useful thing about a fixed tool tray is that it doesn't drift. A folding arm has play in it after enough use; the fixed bracket is the bracket from day one. If your V1 stand is going to run the same workflow for the long haul, the 1693EL.7 is the tray that stays in spec longer. If you're a V2 owner or you're sizing the stand itself, the buying guide covers the electric-stand decision the tool-tray accessory follows from: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389672402988,"sku":"629030","price":37.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.7_629030_image.png?v=1654698391"},{"product_id":"fixed-tablet-holder-for-1693el-1693el-6","title":"Frame mount tablet holder for 1693EL - 1693EL.6","description":"\u003cp\u003eService manuals come to the bench as PDFs now, and the bench they come to is often a tablet. Reading a wiring diagram while you trace a fault, scrolling a torque table while you reach for the wrench, checking the connector pin-out before you probe; the tablet is in your hand, then on the bench, then knocked off the bench, repeatedly, across the course of a single job. The 1693EL.6 Tablet Holder mounts the tablet to the stand column at a fixed angle, where it stays in line of sight no matter where the bike sits in the lift cycle.\u003c\/p\u003e\n\u003ch2\u003eHow it's set up\u003c\/h2\u003e\n\u003cp\u003eThe holder mounts at a 67° angle from vertical; the angle most people read a tablet at when it's leaning against a coffee cup, which is what most people use as the default reading angle. That's not an accident; the geometry is chosen so the screen sits in the right plane for swiping with one hand while the other works the bike.\u003c\/p\u003e\n\u003cp\u003eThe arm itself is adjustable for tablet width, accommodating tablets from 210 mm wide up to 340 mm wide; that covers the small-format tablets up to the larger Pro \/ Air \/ Galaxy Tab S sizes. Rubber pads on the contact surface keep the tablet from scratching as you slot it in and out, which matters because you'll slot it in and out a lot.\u003c\/p\u003e\n\u003ch2\u003eWhy fixed over folding\u003c\/h2\u003e\n\u003cp\u003eThe 1693EL.6 is the fixed-mount option in the tablet\/laptop holder pair. It sits closer to the column than the folding 1693EL.2 laptop holder and stays put; no arm to swing, no folded position to remember. The right call when the e-bike bay is the stand's job and the workflow runs the same shape every day. If you need to clear the work area for non-e-bike service, the folding option is better; if you don't, the fixed holder is one less moving part.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.6\u003c\/li\u003e\n\u003cli\u003eTablet width range: 210 mm to 340 mm\u003c\/li\u003e\n\u003cli\u003eMounting angle: 67° from vertical (set, not adjustable)\u003c\/li\u003e\n\u003cli\u003eMounts to the column of the Unior 1693EL Electric Repair Stand\u003c\/li\u003e\n\u003cli\u003eRubber-protected contact surface\u003c\/li\u003e\n\u003cli\u003eCompatible with both V1 (pre-April 2021) and V2 (April 2021 onward) 1693EL stands; the holder uses the column-collar mount that's unchanged across generations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e tablet holder assembly, column-mount hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693EL.6's mounting interface matches the stand's column directly because the holder was designed by the engineering team that designed the stand. The 67° angle and the rubber pad are spec choices that come out of the same workshop the stand was designed in, not generic adjustments from an aftermarket accessory maker.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe tablet holder is the accessory that gets used most often in our shop because the reference material that used to live on the back wall in laminated A4 sheets is now on the tablet. If you're running PDF service manuals, the tablet is in your hand all day; putting a permanent home for it on the stand column saves the count of times you'll set it down on the bike's saddle and walk away. The tablet-versus-laptop decision is one of the small workstation calls that adds up across a year of e-bike service. Sizing the stand itself first? The buying guide opens with the electric-versus-manual decision the workstation accessories build on: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389707530284,"sku":"629029","price":60.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.6_629029_image.png?v=1654699525"},{"product_id":"folding-tool-tray-for-1693el-1693el-5","title":"Folding Tool Tray for 1693EL - 1693EL.5","description":"\u003cp\u003eDuring a single e-bike job, the same six or seven tools come off the rack and go back over and over. The Allen key for the brake caliper. The Phillips for the display cover. The torque driver for the chainring lockring. Each round trip to the workbench is a slice of the job you don't get back. The 1693EL.5 Folding Tool Tray solves that round-trip by putting a tray of tools next to the bike, on the stand column, where it can be pulled out over the bike when you're using it and folded away when you're not.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the tray\u003c\/h2\u003e\n\u003cp\u003eThe tray itself is a thin metal plate paired with an SOS foam insert. The foam has cutouts and slots that hold drivers upright by their handles, screwdrivers and pliers in the open compartments, and bits in their own row. The geometry is set up for the kind of tool sets a mechanic builds rather than a rigid one-size-fits-all layout; you populate it with what you reach for most, and the foam holds them in place even when the tray is tilted during a lift.\u003c\/p\u003e\n\u003ch2\u003eFolding versus fixed\u003c\/h2\u003e\n\u003cp\u003eThe folding format is the right call for shared bays. The 500 mm articulated arm pulls the tray out over the bike when you need a tool, and folds it back when you're finished; the arm rotates 90° left or right so the tray can sit on either side of the bike depending on the job. When the bay is doing non-e-bike work the next morning, the tray is flat against the column and out of everyone's way.\u003c\/p\u003e\n\u003cp\u003eThe fixed-mount 1693EL.7 sits closer to the column and stays put, which is the right answer for dedicated e-bike service bays. Note that the fixed 1693EL.7 is specified for V1 stands only; the 1693EL.5 folding format covers both V1 and V2 stands and is the only tool-tray option available on a V2 stand.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.5\u003c\/li\u003e\n\u003cli\u003eFolding tool tray for the Unior 1693EL Electric Repair Stand\u003c\/li\u003e\n\u003cli\u003eThin metal plate with SOS foam insert (slot-format tool storage)\u003c\/li\u003e\n\u003cli\u003e500 mm articulated arm; rotates 90° left or right\u003c\/li\u003e\n\u003cli\u003eCompatible with both V1 (pre-April 2021) and V2 (April 2021 onward) 1693EL stands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e tool tray with SOS foam insert, 500 mm folding articulated arm, column-mount hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The SOS foam in the 1693EL.5 is the same foam format Unior uses across its tool-organization line; the foam pattern carries over from the workshop drawers and chest sets, which means the tray plays well with the rest of a Unior-organized workshop without a foam-cutting step.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA tool tray on the stand is one of those accessories that doesn't feel essential until the day you have it, then doesn't feel essential because you can't imagine working without it. The foam slots are what makes the tray work; they hold the drivers from rolling off the tray during a lift, which is the actual failure mode a flat metal shelf has. Tray decisions usually come after the stand decision; the buying guide opens with the manual-versus-electric-stand question that brackets the tray choice: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389722374188,"sku":"629028","price":97.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.5_629028_image.png?v=1654699862"},{"product_id":"folding-small-parts-bin-holder-for-1693el-1693el-3","title":"Folding Small Parts Organizer for 1693EL - 1693EL.3","description":"\u003cp\u003eThere's a moment in every job, usually about thirty seconds after you've removed the bolts holding a motor cover or a battery shroud in place, where you realize you don't know where you put them. The bolts are on the workbench. Or on the floor. Or in the cassette drawer you've been meaning to label. The 1693EL.3 Folding Small Parts Organizer is built around fixing that problem; a holder for plastic parts boxes that mounts to the stand column, pulls out over the bike when you need it, and folds away when you don't.\u003c\/p\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe 1693EL.3 holds the same plastic boxes Unior sells across its other parts-organization products, sized for screws, washers, spacers, springs, and the small bits that come out of an electronics housing. The boxes are not included with the holder; they ship separately so you can size the array to the work you do.\u003c\/p\u003e\n\u003cp\u003eThe mounting hardware is a 500 mm folding articulated arm, the same arm format used by the laptop holder and the tool tray. When you need the bin in the work area, you pull it out over the bike; the bin sits next to the work and the bolts go in by reach. When you're done, you fold the arm back against the column and the bin sits flush, out of the way of the next move.\u003c\/p\u003e\n\u003cp\u003eThe arm rotates 90° left or right, so you can position the bin on either side of the bike without re-mounting.\u003c\/p\u003e\n\u003ch2\u003eWhen folding versus fixed makes sense\u003c\/h2\u003e\n\u003cp\u003eIf the bay doubles as anything other than an e-bike stand; full-suspension service, wheel building, frame swaps; the folding holder is the right call. The fixed-mount cousin (the 1693EL.9) sits permanently to one side of the column and is better for dedicated e-bike bays where the workflow doesn't change shape.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.3\u003c\/li\u003e\n\u003cli\u003eFoldable parts organizer for the Unior 1693EL Electric Repair Stand\u003c\/li\u003e\n\u003cli\u003e500 mm articulated arm; rotates 90° left or right\u003c\/li\u003e\n\u003cli\u003eCompatible with all sizes of Unior parts boxes (sold separately)\u003c\/li\u003e\n\u003cli\u003eCompatible with both V1 (pre-April 2021) and V2 (April 2021 onward) 1693EL stands; the holder uses the column-collar mount that's unchanged across generations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e parts-box organizer frame, 500 mm folding articulated arm, column-mount hardware. Parts boxes sold separately.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693EL.3's parts-box compatibility runs across the Unior catalog, which is the practical benefit of buying organization from a tool maker that has its own modular parts-storage line; the boxes you order with the holder are the same ones that fit in the small drawers under the workbench you already own from Unior.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe folding-arm format is what makes this accessory worth its drawer-of-bolts replacement. A static parts tray on the stand column is fine until you need to roll the stand around or work the lift through its full range; the folding 500 mm arm pulls the bin out when you need it and folds it back the moment you don't. Pair the bin with the right base stand and the workstation comes together; the buying guide walks through the electric-stand decision the parts organizer attaches to: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389730402348,"sku":"629026","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.3_629026_image.png?v=1654700133"},{"product_id":"folding-laptop-holder-for-1693el-1693el-2","title":"Folding Laptop Holder For 1693EL - 1693EL.2","description":"\u003cp\u003eHalf of an e-bike service job happens on a laptop. Manufacturer diagnostic software, firmware updates, fault-code lookups, sometimes a live data stream from the motor while you spin the cranks; the laptop is part of the workflow now, and it doesn't want to live on the workbench while the bike is on the stand. The 1693EL.2 Folding Laptop Holder mounts the laptop to the stand column itself, so the screen follows the bike up and down and the keyboard sits where your hands can reach it without rotating away from the work.\u003c\/p\u003e\n\u003ch2\u003eHow it's designed to work\u003c\/h2\u003e\n\u003cp\u003eThe holder takes laptops up to 15″ across and rides on a 500 mm folding articulated arm. When you need the laptop, you pull it out over the bike on the arm; when you don't, it folds back tight against the column. The tray rotates 90° left or right so you can angle the screen to your sightline regardless of which side of the stand you're working from.\u003c\/p\u003e\n\u003cp\u003eThere's no built-in tilt mechanism (the laptop's own hinge handles that). The 90° rotation is about getting the screen out of the way during a lift transition, or pivoting the keyboard toward the mechanic when the bike is at handlebar height.\u003c\/p\u003e\n\u003ch2\u003eWhen the folding option wins over the fixed\u003c\/h2\u003e\n\u003cp\u003eFolding is the right choice if the stand sees mixed-bike work. The arm pulls clear when you're not on the laptop, which keeps the work area open for a wrench swing or a wheel-out. If the bay is dedicated to e-bike diagnostic work full-time, a fixed-mount option pairs better with steady-state workflows; the folding 1693EL.2 is built for the bay that does e-bike service alongside a frame swap or a chain reset.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.2\u003c\/li\u003e\n\u003cli\u003eMounts to the column of the Unior 1693EL Electric Repair Stand\u003c\/li\u003e\n\u003cli\u003eAccepts laptops up to 15″ screen size\u003c\/li\u003e\n\u003cli\u003eTray rotates 90° left or right\u003c\/li\u003e\n\u003cli\u003e500 mm folding articulated arm\u003c\/li\u003e\n\u003cli\u003eCompatible with both V1 (pre-April 2021) and V2 (April 2021 onward) 1693EL stands; the holder uses the column-collar mount that's unchanged across generations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e laptop holder tray, 500 mm folding articulated arm, column-mount hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693EL.2 is part of a series of accessories Unior builds specifically for its electric stand, which means the mounting hardware and the column interface are matched; the holder doesn't ship as a generic part that hopes to fit; it ships as a 1693EL part that does.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe decision about which holder to buy (laptop versus tablet, folding versus fixed) usually maps to which device the manufacturer's diagnostic software wants to run on. Shimano's E-Tube and most aftermarket motor diagnostics are PC\/Mac applications; if you run those, the 15″ laptop tray is the right buy. The laptop holder is the accessory that pays back on a stand a shop has already committed to long-term; the buying guide covers the electric-stand-versus-manual call the laptop holder follows from: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389736398892,"sku":"629025","price":97.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.2_629025_image.png?v=1654700394"},{"product_id":"remote-control-for-1693el-1693el-20","title":"Remote Control For 1693EL - 1693EL.20","description":"\u003cp\u003eThe hands-free lift is the part of the 1693EL that earns its keep over the course of a workday. Between every step of a job; wheel out, wheel in, drop to floor height for the kickstand fitting, lift again for the cable run; the stand goes up and down. The control panel on the stand column is fine for one or two lifts. By the tenth move, the round-trip to the column starts costing you minutes.\u003c\/p\u003e\n\u003cp\u003eThe Remote Control 1693EL.20 puts the lift commands on a wireless remote that lives on the bench. Same lift \/ lower \/ hold \/ release functionality as the buttons on the stand panel; you operate them without leaving the work. The most practical use case is lifting and lowering the bike to a pre-set height limit, or holding the bike at any custom height with the press of one button.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe remote ships as a paired kit: the wireless remote unit plus a small circuit board that installs inside the stand's electronics housing. Installation takes a few minutes and requires no pairing or additional setup; the remote and the circuit board ship pre-keyed to each other.\u003c\/p\u003e\n\u003cp\u003eThe remote works with the \u003cstrong\u003eV2 version of the 1693EL only;\u003c\/strong\u003e stands delivered from April 2021 onward, with the aluminum column and the updated control-board protocol. V1 stands (steel column, external cable run, no USB ports on the control panel) cannot pair with the 1693EL.20 because the V1 control board doesn't carry the protocol the remote uses. The wireless module's coded signal is unique to each kit, so two stands in the same room running their own remotes won't interfere with each other.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693EL.20\u003c\/li\u003e\n\u003cli\u003eWireless remote control for Unior Electric Repair Stand 1693EL (\u003cstrong\u003eV2 only,\u003c\/strong\u003e April 2021 onward)\u003c\/li\u003e\n\u003cli\u003eIncludes remote unit and pre-paired circuit board\u003c\/li\u003e\n\u003cli\u003eInstallation takes a few minutes; no pairing or additional setup\u003c\/li\u003e\n\u003cli\u003eCoded signal prevents interference between adjacent stands\u003c\/li\u003e\n\u003cli\u003eSame button functionality as the on-column control panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e wireless remote control unit, pre-keyed circuit board, installation hardware.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693EL.20 is a Unior accessory designed and built to work with the Unior electric stand it pairs with; same factory, same engineering team, no third-party integration to fail at the first firmware bump. Most accessory adds to a powered tool come from somewhere else; this one comes from the same place the stand does.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe remote pays for itself faster than people expect. The break-even point in our shop was about a week; by then the round-trips to the column have added up to the kind of time you don't get back. If you're on the fence, the test is to count the number of times you operate the stand panel during a single job; if it's more than four, the remote is worth it. The e-bike service workflow is the use case that makes the remote pay back faster than analog service does, because the lift cadence is higher when the work cycle includes battery-out and battery-in steps. If you haven't bought the stand yet, the electric-stand inflection point is covered in the buying guide before the accessory math kicks in: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40389836111916,"sku":"626223","price":145.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693el.20_626223_image.png?v=1654703031"},{"product_id":"stationary-pro-road-stand-without-plate-1693rp1","title":"Pro road repair stand, without plate - 1693RP1","description":"\u003cp\u003eThe 1693RP1 is the Pro Road Stand built for a permanent floor-bolt install: the same five-axis geometry as the 5.1 kg traveling Pro Road Stand (1693R), without the 30 kg steel base plate that ships with the standalone shop version (1693RP). The stand bolts directly to the workshop floor, which is the lower-profile install for shops that own the slab and have permission to drill it.\u003c\/p\u003e\n\u003cp\u003eA floor-bolted install pulls the stand's footprint down to the column base, which on a busy bench is the half-square-foot a 30 kg plate would otherwise occupy. The trade-off versus the plate-equipped 1693RP is permanence (the install requires concrete anchors and isn't relocated) for the gain of working floor space. For owner-occupied shops, that's usually the trade you want; for leased space where drilling isn't allowed, the plate variant (1693RP) is the right call.\u003c\/p\u003e\n\u003cp\u003eThe bike mount geometry is the same Pro Road Stand approach: support the bike at the bottom-bracket area instead of clamping a frame tube. That's the right geometry for TT bikes, aero road bikes, and any frame whose tube shapes are wrong for a clamp-style stand. Five-axis adjustability presents the bike to the mechanic in whatever orientation the job needs.\u003c\/p\u003e\n\u003ch2\u003eAdjustments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e spans the 5′0″ to 6′5″ mechanic range without crouching or stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFore-aft:\u003c\/strong\u003e dials in the bike's stand position relative to the mechanic's reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX-axis rotation:\u003c\/strong\u003e at the column, opens up cramped service bays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-axis rotation:\u003c\/strong\u003e at the bike support, swings the bike for back-side access without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eY-axis rotation:\u003c\/strong\u003e at the bike, accesses the underside for cable routing or hidden-brake service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693RP1\u003c\/li\u003e\n\u003cli\u003eWorking capacity: 27 kg (60 lb)\u003c\/li\u003e\n\u003cli\u003eMount: floor-bolted (anchors and fasteners sold separately, per slab specification)\u003c\/li\u003e\n\u003cli\u003eBike mount: bottom-bracket-area, road and gravel\u003c\/li\u003e\n\u003cli\u003eAdjustments: height, fore-aft, X, Y, and Z rotation\u003c\/li\u003e\n\u003cli\u003eThru-axle adaptors (sold separately) extend compatibility to thru-axle bikes\u003c\/li\u003e\n\u003cli\u003eDesigned in coordination with team service mechanics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e stand assembly (without base plate; floor-bolt install).\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Pro Road Stand line was shaped by team-mechanic service-truck feedback before it became a shop bench fixture; the 1693RP1 is the configuration that takes the same geometry into a permanent floor install for shops that have committed to road and aero-road service as part of their daily mix.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe plate-or-floor-bolt decision is usually a property-rights decision more than a workflow decision. Owner-occupied shops bolt to the floor and skip the plate; leased shops buy the plate and stay above the slab. The stand itself is the same, the install is the cost difference. For shops weighing the 1693RP1 against the 1693RP, that's the cleanest framing of the trade-off. Still weighing whether the road stand is the right format versus a tripod? The buying guide makes the call concrete: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":40786566578220,"sku":"628794","price":384.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693rp1.png?v=1667241862"},{"product_id":"bag-for-bikegator-bike-stand","title":"Bag for BikeGator bike stand - 1693BAG","description":"\u003cp\u003eStrong and quality made bag is intended for protection and carrying of the 1693A (1693AS) BikeGator stand. It features shoulder and hand straps, two level storage for stand frame and separated jaw and tool tray. Useful to carry on plane, in the car or just to store in your workshop.\u003c\/p\u003e\n\u003cp\u003eMaterial: polyester fabric\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":41332612071468,"sku":"624035","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/BagforBikeGatorbikestand.jpg?v=1737557045"},{"product_id":"pro-repair-stand-with-single-clamp-auto-adjustable","title":"Pro Repair Stand With Single Clamp, Auto Adjustable - 1693B-US","description":"\u003cp\u003eA workshop-grade single-arm repair stand with a fixed base plate, an auto-adjustable clamp head whose spring-set jaws take a 24–32 mm seatpost or tube without a pre-measure step, and the load capacity to take 30 kg of bike on the clamp. Built for the bench-pace work of a repair shop or a home workshop that services more than the occasional flat tire.\u003c\/p\u003e\n\u003cp\u003eA repair stand is the workshop tool that determines whether everything else feels like work. With the bike at chest height, in a clamp that doesn't slip, the mechanic stands; without a stand, every adjustment is on the floor with the bike upside-down or leaning against a wall, and an hour-long service turns into a back-saving compromise. The repair stand is the foundational equipment; buy it before the chain tool, before the torque wrench, before anything that isn't a basic hex set.\u003c\/p\u003e\n\u003ch2\u003eWhy the 1693B-US sits where it does in the lineup\u003c\/h2\u003e\n\u003cp\u003eThe auto-adjustable clamp is the load-bearing convenience feature. Older repair stands require you to set the jaw opening manually before clamping; with the auto-adjustable version, you insert the seatpost or tube between the open jaws and close the handle; a spring sets the jaw opening, so you do not have to measure the tube first. For a shop that services many bikes a day, the auto-adjustment saves several minutes of cumulative setup time per shift.\u003c\/p\u003e\n\u003cp\u003eThe fixed base plate is the structural choice. A folding base saves shop space but introduces a flex point at the leg-to-base hinge; the fixed plate stays rigid under load. For a workshop with permanent floor space allocated to bench work, the fixed plate is the right trade-off.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum load: 30 kg (covers most road and gravel bikes; e-MTBs with full battery + motor may approach the limit)\u003c\/li\u003e\n\u003cli\u003eClamp: auto-adjustable (1693.1), spring-set jaws for tubes 24–32 mm; close the handle to lock\u003c\/li\u003e\n\u003cli\u003eBase: fixed plate, ergonomically designed (726 × 572 mm)\u003c\/li\u003e\n\u003cli\u003eStand weight: 36 kg; column height 985–1570 mm (1700 mm overall)\u003c\/li\u003e\n\u003cli\u003eCompatible accessory: replaceable rubber jaw covers (1693.11)\u003c\/li\u003e\n\u003cli\u003eSKU: 1693B-US (625011)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693 stand line is the workshop foundation Unior's team-supported mechanics work on at races and at home shops; the Pro Repair Stand series spans single-arm, double-arm, electric-assist, and stationary variants, and the 1693B-US is the entry-pro tier in that family.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe 24–32 mm range is sized for traditional aluminum or steel seatposts and similarly sized tubes. Unior recommends considering a 1693.1S or 1693.1Q clamp for carbon or dropper seatposts. Some bike makers advise against clamping thin-walled carbon; check the manufacturer for the suggested clamp point, and clean the tube and jaws before clamping.\u003c\/p\u003e\n\u003cp\u003eFor the broader picture on what a home or shop mechanic should keep on the bench, including the stand alongside the wrenches: \u003ca href=\"\/blogs\/tech-tips\/what-bike-tools-do-i-need\"\u003eWhat bike tools do I need? →\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bikes will the 1693B-US hold?\u003c\/strong\u003e Unior rates the stand to 30 kg. The 1693.1 clamp takes tubes and seatposts from 24 to 32 mm and is intended for traditional aluminum or steel seatposts. For carbon or dropper posts Unior points you to a 1693.1S or 1693.1Q clamp instead. Some frame makers advise against clamping thin-walled carbon; check the bike manufacturer for the suggested clamp point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the auto-adjustable clamp work?\u003c\/strong\u003e A spring sets the jaw opening. Insert the seatpost or tube between the open jaws and close the handle to lock. To release, hold the bike and flip the handle. Height is a separate lever on the column (985–1570 mm); a second lever lets the clamp head rotate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the dimensions, and which spare parts fit?\u003c\/strong\u003e The stand weighs 36 kg. Column height is 985–1570 mm (1700 mm overall). The fixed plate is 726 × 572 mm. The wear part is the 1693.11 rubber jaw covers (two-piece set). Unior also lists a QR lever and a two-piece bushing set as family spares for 1693A\/B\/C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the 1693B-US ship?\u003c\/strong\u003e It ships as oversized freight and is excluded from the free-shipping-over-$75 offer. Shipping is charged at carrier cost, calculated at checkout. If the rest of your cart would otherwise qualify for free shipping, order the stand as its own checkout so the smaller items can still take that rate.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":41332612202540,"sku":"625011","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/ProRepairStandWithSingleClamp_AutoAdjustable.jpg?v=1737556936"},{"product_id":"pro-repair-clamp-manually-adjustable","title":"Pro Repair Clamp, Manually Adjustable - 1693.1S-US","description":"\u003cp\u003eThe manually-adjustable clamp head for the Unior 1693 Pro Repair Stand family. A hand-turned screw on the side of the clamp body sets the jaw opening to the frame tube's exact diameter, and the closing pressure is dialed in by the same screw; no wrench needed, no measure-the-tube step against a published spec. The deliberate, fits-anything clamp for the workshop where the frames coming in vary widely.\u003c\/p\u003e\n\u003cp\u003eThe wider jaw range (24-40 mm vs. the auto-adjustable 1693.1-US's 24-32 mm) is the load-bearing difference. A 40 mm clamping width covers the oversized top tubes on some BMX frames, the oversize aluminum frames on DH bikes, and the dropper-post hardware on MTBs in retracted position. The cases that fight the auto-adjustable's range are exactly the cases the manually-adjustable's range covers without fuss.\u003c\/p\u003e\n\u003ch2\u003eWhere the screw matters\u003c\/h2\u003e\n\u003cp\u003eThe screw is on the side of the clamp body, accessible without a wrench. Turn it counter-clockwise to open the jaw; turn clockwise to close. At the working position, the screw also sets the closing pressure: more screw turns past first contact = more clamping force on the frame tube. For a thin-walled or paint-sensitive frame, the mechanic sets a light closing pressure; for an aggressive DH frame that needs to hold against torque-wrench work on the cassette, the pressure goes up.\u003c\/p\u003e\n\u003cp\u003eThe manual adjustment is slower than the auto-adjustable per setup, but the trade-off pays off in two cases: frames at the upper end of the diameter range (above 32 mm) and frames where the mechanic wants to set a specific closing pressure for paint or carbon protection.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame tube diameter: 24 mm to 40 mm\u003c\/li\u003e\n\u003cli\u003eFits the Unior 1693 Pro Repair Stand family\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers (1693.11) for grip and frame protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamp type: manually adjustable via side-mounted screw\u003c\/li\u003e\n\u003cli\u003eJaw width range: 24-40 mm\u003c\/li\u003e\n\u003cli\u003ePressure adjustment: hand-turned screw (no wrench required)\u003c\/li\u003e\n\u003cli\u003eSKU: 1693.1S-US (629232)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693 Pro Repair Stand series spans single-arm, double-arm, electric-assist, and stationary variants; the manually-adjustable clamp is the spec choice for shops working on frames outside the 32 mm auto-adjustable range, or workshops where the mechanic prefers the closing-pressure control on every clamp event.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eFor a carbon frame, the manually-adjustable clamp lets you set a lighter closing pressure than the auto-adjustable's spring delivers. The auto-adjustable is calibrated for steel and aluminum frame integrity; carbon has a lower compression threshold before paint cracks or layup damage appears. A carbon-specific workshop tends to run the manually-adjustable on at least one stand for the bikes where the mechanic wants closing-pressure control.\u003c\/p\u003e\n\u003cp\u003eFor the picture on tool-kit inventory and where a manually-adjustable clamp earns priority on a carbon-frame or oversized-tube workbench: \u003ca href=\"\/blogs\/tech-tips\/what-bike-tools-do-i-need\"\u003eWhat bike tools do I need? →\u003c\/a\u003e.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":41332612857900,"sku":"629232","price":113.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.1s-us_629232_image_1024.jpg?v=1686142073"},{"product_id":"pro-repair-clamp-auto-adjustable","title":"Pro Repair Clamp, Auto Adjustable - 1693.1-US","description":"\u003cp\u003eThe auto-adjustable clamp head for the Unior 1693 Pro Repair Stand family. Push the bike's frame tube into the open jaw; the spring-loaded clamp closes around it without you having to set the jaw width first. The everyday workshop-pace alternative to a manually-adjusted clamp where the mechanic measures the tube and sets the jaw before each bike.\u003c\/p\u003e\n\u003ch2\u003eWhere it fits\u003c\/h2\u003e\n\u003cp\u003eThe 1693.1-US is the replacement \/ standalone clamp head for the 1693 stand line. A workshop with multiple 1693 stands can keep the same model of clamp on each stand for repeatable workflow, or pair an auto-adjustable on one stand with a manually-adjustable (1693.1S-US) on another for the cases where a slow, deliberate clamp is the better tool.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame tube diameter: 24 mm to 32 mm\u003c\/li\u003e\n\u003cli\u003eFits the Unior 1693 Pro Repair Stand family (1693B-US, 1693BS1-US, and others in the 1693 line)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers (1693.11) for grip and frame protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamp type: auto-adjustable, spring-loaded\u003c\/li\u003e\n\u003cli\u003eJaw width range: 24-32 mm\u003c\/li\u003e\n\u003cli\u003eSKU: 1693.1-US (629233)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693 Pro Repair Stand series is the workshop-grade stand line in Unior's bench-organization catalog; the auto-adjustable clamp is the spec choice for shops doing high-volume work where each setup second matters across a day.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eAuto-adjustable beats manually-adjustable on time per setup, but loses a small amount of control on the clamping pressure. For a frame tube that's at the lower or upper end of the 24-32 mm range, the auto-adjustable's spring sets a working pressure that's correct for the range's center; outside that, you'll want the manually-adjustable version (1693.1S-US) where you can dial the jaw opening to the specific tube and set the closing pressure with a hand-turned screw. Most shops carry both formats on different stands so each is available when its workflow fits.\u003c\/p\u003e\n\u003cp\u003eFor the broader picture on workshop equipment essentials, including repair stands alongside the wrenches and torque tools: \u003ca href=\"\/blogs\/tech-tips\/what-bike-tools-do-i-need\"\u003eWhat bike tools do I need? →\u003c\/a\u003e.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":41332613021740,"sku":"629233","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.1-us_629233_image_1024.jpg?v=1686142075"},{"product_id":"fixed-plate-electric-repair-stand-1693el","title":"Fixed Plate Electric Repair Stand - 1693EL","description":"\u003cp\u003eA rolling stand is the right call when one stand has to cover several service bays; push it to where the bike is and pull it back when you're done. The trade-off is that the column needs the mass of the base to stay vertical under load, which means the base footprint sits at the customer's feet and the column wobbles a half-inch under a hard pry. In a dedicated e-bike bay where the stand never leaves its spot, that trade-off is the wrong way around.\u003c\/p\u003e\n\u003cp\u003eThe Fixed Plate for the 1693EL Electric Repair Stand is the floor-mount conversion. It's a single plate that bolts the column directly to the shop floor, replacing the rolling base. The stand stops being a rolling tool and becomes a fixed-bay tool; the wobble goes away, the floor footprint shrinks to the column's own base diameter, and the lift's wired control panel sits at a permanent height that doesn't change every time the stand gets pushed sideways.\u003c\/p\u003e\n\u003ch2\u003eWhen to fit this\u003c\/h2\u003e\n\u003cp\u003eThree workshop layouts make the fixed plate the right call. The first is a dedicated e-bike bay where the same stand sees the same bikes day after day; nothing about the workflow benefits from the stand moving. The second is a service environment where the column needs to be precisely positioned relative to a permanent feature (a wall-mounted parts wall, a torque-arm anchor point, a wired controller box on the bench). The third is any space where the rolling base's footprint is consuming square footage that the rest of the shop layout needs.\u003c\/p\u003e\n\u003cp\u003eIf the stand sees use in more than one bay, or moves out of the way at the end of the day, the rolling base is doing its job and the fixed plate isn't for you.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFloor-mount conversion accessory for the Unior 1693EL Electric Repair Stand\u003c\/li\u003e\n\u003cli\u003eReplaces the rolling base; bolts the column directly to the shop floor\u003c\/li\u003e\n\u003cli\u003eSingle-product purchase, sold separately from the stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The fixed plate is the kind of accessory that exists because the 1693EL itself is a tool people commit to for the long term; the stand outlives the shop layout that originally housed it, so Unior makes the parts that let it move from rolling base to fixed floor and back again as the workspace changes.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe decision between rolling and fixed isn't usually obvious on day one; most shops start rolling and migrate to fixed once they've worked out which bay the e-bike work belongs in. The fixed plate is a low-cost retrofit when you reach that point, not a decision you have to make before the stand ships. Our e-bike servicing guide covers why a permanent e-bike bay makes the floor-mount conversion worth the half-hour install: \u003ca href=\"\/blogs\/tech-tips\/servicing-an-e-bike-whats-different\"\u003eServicing an e-bike: what's different from an analog bike →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":41686523183148,"sku":"628743","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/Electric-Stand-Base-600x600.jpg?v=1692954534"},{"product_id":"bikegator-repair-stand-quick-release-1693aq0","title":"BikeGator Repair Stand, Quick Release - 1693AQ0","description":"\u003cp\u003eThe BikeGator Quick Release is the base BikeGator portable stand fitted with the Pro Shop quick-release clamp, the same clamp head we ship on our shop-floor 1693 series stands. Squeeze the jaws by hand until they hold the tube, then turn the rotating handle to add clamp force. To release, turn the handle the other way first, then press the quick-release button; using the button alone can damage the lock and void the warranty.\u003c\/p\u003e\n\u003cp\u003eThis 1693AQ0 is Unior's current BikeGator generation of the 1693A\/1693AS stand: folding support tubes, a new jaw mount and rotation system, an improved sliding system, and precision aluminum and steel parts. Height adjusts from 980 to 1500 mm. The stand weighs 5.7 kg without a tool tray and is rated to 30 kg. The QR clamp is the differentiator versus the official manual BikeGator (1693AS0-US), which is specified for 24 to 40 mm tubes.\u003c\/p\u003e\n\u003cp\u003eThe clamp's 22 to 60 mm tube range is the widest in our portable line. It covers standard 30 mm round seatposts, deep aero seatposts, modern oversized top tubes, and the 60 mm tubes you find on some downhill bikes and most cargo e-bikes; the official manual BikeGator (1693AS0-US) is specified for 24 to 40 mm tubes, which covers a typical road and gravel mix but not the 60 mm end of this QR clamp.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693AQ0\u003c\/li\u003e\n\u003cli\u003eWeight without tool tray: 5.7 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 980–1500 mm\u003c\/li\u003e\n\u003cli\u003eClamp: Pro Shop quick-release, 22–60 mm tube range\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eNew jaw mount and rotation system; improved sliding system\u003c\/li\u003e\n\u003cli\u003ePrecision aluminum and steel parts construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding stand body, Pro Shop quick-release clamp head pre-installed with rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Pro Shop quick-release clamp head fitted to this portable is the same head specified on our 1693 shop-floor stands; the design didn't get downgraded to fit a portable price point, the portable got a shop-floor head. The 22 to 60 mm tube range is what makes this BikeGator the right call for a mixed-bike workshop where the next bike through the door could be a road bike, a gravel rig, or a cargo e-bike.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe official BikeGator foldable line currently splits on the clamp: this 1693AQ0 carries the Pro Shop QR (22–60 mm, any shape); the 1693AS0-US carries the manual clamp (24–40 mm). Same folding body, same 980–1500 mm height, same 30 kg rating. The broader portable-versus-shop-stand decision sits here: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I use the Pro Shop quick-release clamp on the 1693AQ0?\u003c\/strong\u003e Squeeze the jaws by hand until they hold the tube, then turn the rotating handle to add clamp force. To take the bike out, turn the handle the other way first and only then press the red quick-release button. Unior warns that opening the clamp with the button alone can damage the lock and void the warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tube sizes does the BikeGator QR hold?\u003c\/strong\u003e The fitted Pro Shop Clamp (1693.1Q) takes tubes of any shape from 22 mm to 60 mm. Jaw height is 70 mm, which Unior specifies for smaller seatposts and dropper posts. The official manual BikeGator (1693AS0-US) is a different clamp, specified 24–40 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 1693AQ0 include a tool tray or carry bag?\u003c\/strong\u003e No. Unior lists the weight as 5.7 kg without a tool tray. The 1693.3 tray and the 1693BAG carry bag are official accessories sold separately, as are the 1693.11 rubber jaw covers and the 1693.1Q-SP.1 rebuild kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the BikeGator QR ship?\u003c\/strong\u003e It is an oversized item, so it is not eligible for the free-shipping tier. It ships at the rate shown at checkout and can only be delivered within the continental United States. If the rest of your cart qualifies for free shipping, ordering the stand separately keeps that option available for the smaller items.\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43199269371948,"sku":"627768","price":224.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/BikeGator_-Thumbnail_65a11ddc-ea11-4432-921f-8f8be5c18044.jpg?v=1729776501"},{"product_id":"bikegator-repair-stand-auto-adjustable-1693a0-us","title":"BikeGator Repair Stand, Auto Adjustable - 1693A0-US","description":"\u003cp\u003eThe BikeGator Auto Adjustable is the base BikeGator stand body fitted with the auto-adjusting clamp head. The jaw closes onto whatever tube is presented, between 24 and 40 mm in diameter, without a separate threaded-handle adjustment between bikes. Two motions become one: drop the bike in, close the lever, the clamp finds the diameter and grips.\u003c\/p\u003e\n\u003cp\u003eFor a mechanic working through a queue of road, gravel, and hardtail mountain bikes (most of which sit between 28 and 36 mm at the clamping point), the auto-adjust cadence is what makes the BikeGator earn the “portable shop stand” framing rather than the “home garage stand” framing. The original BikeGator (1693AS0-US) ships with the manually adjustable lever by default; the 1693A0-US is the same base stand with the auto-adjust head, for buyers whose workflow is rapid bike-to-bike rather than steady time on one bike.\u003c\/p\u003e\n\u003cp\u003eThe 30 kg working capacity and the 5.7 kg folded weight are unchanged from the rest of the BikeGator family; the differentiation lives entirely in the clamp head. Replaceable rubber jaw covers (Unior 1693.11) come pre-installed and are the standard service item; when the rubber wears, you replace the rubber, not the clamp.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693A0-US\u003c\/li\u003e\n\u003cli\u003eFolded weight: 5.7 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 980–1500 mm (BikeGator stand body)\u003c\/li\u003e\n\u003cli\u003eClamp: Auto-adjustable jaw, 24–32 mm tube range\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eFolding form factor; tool-free setup\u003c\/li\u003e\n\u003cli\u003eCompatible with BikeGator family rubber jaw cover service items\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding BikeGator stand body, auto-adjustable clamp head pre-installed with rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The auto-adjust clamp mechanism on the BikeGator is the same auto-adjust head fitted to the upgraded BikeGator+ family; what changes between the base BikeGator and the BikeGator+ is the stand body, not the clamp. The base BikeGator's sliding system and parts mix are the original 1693A line; the + family refines them. If the clamp head is the workflow decision and the body is the budget decision, this is the configuration that prioritizes the clamp.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe auto-adjust clamp pays back per bike-swap; the math is simple, but it's per-swap savings, not per-job savings. A home mechanic who clamps one bike per session won't notice; a traveling mechanic who clamps thirty bikes per Saturday will. The trick is being honest about which one you are, because the auto-adjust premium versus a manual lever is small enough that most buyers can afford to be wrong, but big enough that the wrong choice nags. The walk-through covers the bike-swap-frequency angle alongside the portable-versus-shop-stand question: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43312529768492,"sku":"625147","price":415.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693as0-us.jpg?v=1642720491"},{"product_id":"bikegator-repair-stand-manually-adjustable-1693as-us","title":"BikeGator+ Repair Stand, Manually adjustable - 1693AS-US","description":"\u003cp\u003eThe BikeGator+ Manually Adjustable pairs the refined 1693A+ stand body with the cam-style manual clamp, the lever-and-threaded-handle design that experienced shop mechanics know without thinking. A separate handle dials in the jaw to the tube diameter; the lever closes and opens the jaw against that setting. Two motions instead of one, but every motion is deliberate and the clamp pressure stays exactly where you left it from one bike to the next.\u003c\/p\u003e\n\u003cp\u003eFor a portable stand that sees the same bike (or the same few bikes) over a session, manual adjustment is faster than auto. Set the jaw once at the start of the morning, swap bikes by working the lever; the pressure is dialed-in, the bike sits where you put it, no recalibration happens between bikes that share a tube diameter. Where the auto-adjust pays back is rapid swapping of bikes with different diameters; where the manual pays back is steady work on similar bikes, where the predictability of the setting is worth more than the speed of the swap.\u003c\/p\u003e\n\u003cp\u003eThe BikeGator+ generation upgrades the original portable's sliding system, the jaw mount and rotation system, and the precision aluminum and steel parts mix. Same 5.7 kg folded weight, same 30 kg working load, same fold-to-pack form factor as the original BikeGator; the BikeGator+ refines the parts the working mechanics asked the field-test team to revisit. The metal tool tray with interchangeable SOS foam insert is the workshop-grade detail that lifts the BikeGator+ family above the entry portables: bits, axles, bolts have a place to land that isn't the asphalt.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693AS-US\u003c\/li\u003e\n\u003cli\u003eFolded weight (without tool tray): 5.7 kg; height 980–1550 mm\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eClamp: Manually adjustable cam-style, 24–40 mm tube range\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eNew jaw mount and rotation system; improved sliding system\u003c\/li\u003e\n\u003cli\u003ePrecision aluminum and steel parts construction\u003c\/li\u003e\n\u003cli\u003eMetal tool tray with interchangeable SOS foam insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding stand body with refined sliding system, manually adjustable cam-style clamp head pre-installed with rubber jaw covers, metal tool tray with SOS foam insert.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The manually adjustable cam clamp is the mechanism that survived from the original 1693A line into the BikeGator+ refresh because it's the mechanism workshop mechanics keep asking for; predictable, repeatable, no electronics to fail at a wet-grass race start. The BikeGator+ generation didn't replace it, it just improved the body around it.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe manual cam clamp is what you reach for when you want one fewer thing to think about during the work. The threaded handle is the place where the clamp pressure is decided and stays decided; the lever does only one job. For mechanics whose stand spends the morning on a single bike for a tune-up or build session, this is the clamp that matches the work. The cam-versus-QR question gets covered alongside the rest of the stand-selection trade-offs here: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the manually adjustable clamp work?\u003c\/strong\u003e On 1693AS you set the jaw opening by turning the long screw by hand, then put the open jaw on the seatpost or frame tube and turn the handle until it grips. Flip the handle to release. The jaw also rotates: release its lever and set the angle before you clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tube sizes and bike weights does it take?\u003c\/strong\u003e The jaws are rated for tubes from 24 mm to 40 mm in diameter. Maximum load capacity is 30 kg. Some bike makers advise against clamping thin-walled carbon frames; check the manufacturer and clean the tube before you clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included, and how is BikeGator+ different from the original BikeGator?\u003c\/strong\u003e The 1693AS-US ships with the folding stand, the manually adjustable clamp with 1693.11 rubber jaw covers, and a metal tool tray with an interchangeable SOS foam insert. The Plus generation adds the new jaw-mount and rotation system and an improved sliding system. A carrying bag is not listed as included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall is it, and does it fold?\u003c\/strong\u003e Working height adjusts from 980 mm to 1550 mm (release the column lever and slide the top tube). The three support tubes fold together for transport. Weight without the tool tray is 5.7 kg. Replacement jaw covers are article 1693.11.\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43312531013676,"sku":"625010","price":509.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/BikeGator_-Stand-1_ae246512-e708-4ae8-85c3-30c9b7ec02a6.jpg?v=1729776423"},{"product_id":"bikegator-repair-stand-auto-adjustable-1693a-us","title":"BikeGator+ Repair Stand, Auto adjustable - 1693A-US","description":"\u003cp\u003eThe BikeGator+ Auto Adjustable is the top-tier portable in our 1693A family: the refined sliding system, the precision aluminum and steel parts mix, and the auto-adjusting jaw mount, paired with a metal tool tray and interchangeable SOS foam insert. The base BikeGator (1693AS0-US) covers most home and traveling-mechanic use; the BikeGator+ family steps up when the portable becomes a high-throughput shop secondary or a race-day primary that needs to hold the line through three days of back-to-back service.\u003c\/p\u003e\n\u003cp\u003eAuto-adjustable is the clamp behavior most mechanics underrate until they spend a weekend swapping bikes in a race tent. The jaw closes onto whatever tube diameter is presented (24 to 32 mm), without a separate threaded-handle adjustment step. Drop the bike in, close the lever, the clamp finds the diameter; drop the next bike in, the clamp finds it again. The time saving per swap is small; the compounding effect across a 50-bike race-support day is meaningful.\u003c\/p\u003e\n\u003cp\u003eThe metal tool tray with interchangeable SOS foam insert is the BikeGator+ differentiator versus the base BikeGator and a workshop-grade detail that race mechanics asked for: the tray holds the bits and tools that come out during a wheel swap or a derailleur dial-in, the foam organizes them so nothing rolls off the tray onto the asphalt, and the tray itself is metal rather than the molded plastic seen on most portable stands.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693A-US\u003c\/li\u003e\n\u003cli\u003eFolded weight (without tool tray): 5.7 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eClamp: Auto-adjustable jaw, 24–32 mm tube range\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eNew jaw mount and rotation system; improved sliding system\u003c\/li\u003e\n\u003cli\u003ePrecision aluminum and steel parts construction\u003c\/li\u003e\n\u003cli\u003eMetal tool tray with interchangeable SOS foam insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding stand body with refined sliding system, auto-adjustable clamp head pre-installed with rubber jaw covers, metal tool tray with SOS foam insert.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The BikeGator+ generation is what happened when team-mechanic field-service notes worked their way back into the production line: the jaw mount, the sliding tightness, and the metal tool tray are the points reviewers and team mechanics asked the original BikeGator to grow into. The pack weight didn't change because that's still the point of a portable stand.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eWhere the BikeGator+ Auto-adjust earns its premium over the base BikeGator is the bike-swap cadence. If the stand sees one bike at a time and that bike is in the stand for half a day, the auto-adjust mechanism is a luxury. If the stand sees a parade of different bikes back-to-back, the auto-adjust pays back fast. The decision is mostly about how many bike swaps per day your portable sees: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tube sizes does the auto-adjusting jaw take?\u003c\/strong\u003e Official Unior catalog range for 1693A-US is 24 to 32 mm. That is the auto-adjust spring jaw. The sibling BikeGator+ with the manual clamp (1693AS-US) is 24 to 40 mm; the BikeGator with the Pro Shop quick-release clamp (1693AQ0) is 22 to 60 mm. Do not mix those ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the auto jaw differ from the manual BikeGator+?\u003c\/strong\u003e On 1693A-US the jaw is the auto-adjust spring clamp: put the opened jaws on the seatpost or tube and turn the clamp handle until they grab. The long screw that resets jaw opening on 1693AS is not part of this stand. Flip the same handle to release. Official load on both + models is 30 kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included, and how much does it weigh?\u003c\/strong\u003e BikeGator+ ships with the metal 1693.3 tool tray and its interchangeable SOS foam insert. The official catalog weight for 1693A-US is 6.5 kg with the tray. Current family datasheets list the stand body at 5.7 kg without the tray. Replaceable rubber covers are item 1693.11. Height on the current BikeGator generation is 980 to 1500 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the BikeGator+ Auto ship, and can I clamp carbon?\u003c\/strong\u003e It is an oversized item, so it is not eligible for the free-shipping tier. It ships at the carrier-calculated rate shown at checkout and can only be delivered within the continental United States. Unior warns that some manufacturers recommend not clamping thin-walled carbon frames; check with the frame maker for a clamp location, and clean the tube and the jaws first.\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43312531898412,"sku":"625009","price":436.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/BikeGator_-Stand-1.jpg?v=1729776308"},{"product_id":"bikegator-repair-stand-quick-release-1693aq","title":"BikeGator+ Repair Stand, Quick Release Clamp","description":"\u003cp\u003eThe BikeGator+ Quick Release builds on the original BikeGator portable platform with a refined sliding system, a new jaw mount and rotation system, and a precision aluminum-and-steel parts mix that adds stiffness without adding pack weight. The Pro Shop Clamp ships factory-fitted, so the 22–60 mm tube range and the quick-release button come standard. Same 5.7 kg packing weight, same 30 kg working load, same 980–1500 mm height range as the base BikeGator; the upgrade is in the materials and the mechanism, not the form factor.\u003c\/p\u003e\n\u003cp\u003eThe jaw rotation system lets the clamp spin a full 360° around the column without slipping, which is the small detail that matters when you're working a derailleur on a trail-side bike or a tubeless install where the wheel has to face a specific direction for the sealant to find the bead. The improved sliding system tightens the column-to-clamp interface so the clamp height stays put once set, even when a heavy bike loads it eccentrically.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693AQ\u003c\/li\u003e\n\u003cli\u003eFolded weight: 5.7 kg\u003c\/li\u003e\n\u003cli\u003eWorking load capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 980–1500 mm\u003c\/li\u003e\n\u003cli\u003eClamp: Pro Shop Clamp (22–60 mm jaw range, quick-release)\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eConstruction: precision aluminum and steel parts\u003c\/li\u003e\n\u003cli\u003e360° jaw rotation, no-slip lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e folding stand body with refined sliding system, Pro Shop Clamp head pre-installed with rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The BikeGator+ generation is what happened when team-mechanic field-service notes worked their way back into the production line: the rotation system, the sliding tightness, and the materials mix are the points the original BikeGator's reviewers asked about. The pack weight didn't change because that's the point of a portable stand.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe Pro Shop Clamp's quick-release button is the bike-to-bike speed boost (open the clamp, drop the bike out, drop the next bike in, close the clamp); the 70 mm height is the detail that matters on bikes with dropper posts. There's a deeper comparison between the Pro Shop Clamp and the alternatives over here: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43312538189868,"sku":"627767","price":554.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/BikeGator_-Thumbnail.jpg?v=1729766629"},{"product_id":"1693-25-stand-body-for-1693-2","title":"Stand body for 623251","description":"\u003cp\u003eThe Stand Body 1693.25 is the bare structural arm of the wall- or bench-mounted 1693.2 repair stand line: the steel post, the column geometry, and the mount surfaces that take the clamp head, sold as a standalone replacement part. Two cases bring shops to the bare body: a stand that's been damaged at the mount (a heavy impact, a service-truck-induced bend) and a shop swapping clamp heads on a long-lived wall-mount install without replacing the whole stand.\u003c\/p\u003e\n\u003cp\u003eFor shops running the 1693.2 cam-style or the 1693.2S quick-release wall-mount line in daily service, the stand body is the long-lived part of the install; the clamp head sees the bike-to-bike wear and is the typical service-replacement item, but the stand body itself can be the load-bearing replacement if the mount has been impacted or worked past its working tolerance.\u003c\/p\u003e\n\u003ch2\u003eWhat it replaces\u003c\/h2\u003e\n\u003cp\u003eThe 1693.25 replaces the structural arm only; it does not include the clamp head, the mount hardware to the wall or bench, or the rubber jaw covers. The intended use is as a replacement body to receive an existing or new clamp head (1693.1 cam-style, 1693.1S manually adjustable, or 1693.1Q Pro Shop QR) on a wall or bench install where the previous body has been retired.\u003c\/p\u003e\n\u003cp\u003eFor shops fitting a new clamp head to a working stand body, the clamp heads are sold separately and listed on their own product pages.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the Unior 1693.2 family of wall- or bench-mounted repair stand installs. The clamp-head mount geometry is shared across the 1693.2 (cam-style) and 1693.2S (QR) configurations; the stand body is compatible with either clamp head choice. Mount hardware to the wall stud or benchtop is install-side and not included with the body itself.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.25 (replacement stand body for 1693.2 series)\u003c\/li\u003e\n\u003cli\u003eConstruction: steel, finished for workshop service life\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior 1693.2 wall- or bench-mount stand family\u003c\/li\u003e\n\u003cli\u003eReplaces: stand body only; clamp head and mount hardware sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e stand body arm with clamp-head mount interface.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. A wall-mount install in a working shop sees occasional impacts; the 1693.25 is the catalog answer for the morning after one. Steel post, finished to the same workshop spec as the rest of the 1693.2 family, sized to take a clamp head and the loads a wall-mount sees from below.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eMost shops never order the 1693.25; the stand body outlives the rest of the install. The two situations where it's the right buy are damage repair (a forklift, a falling shelf, a service-truck door catching the stand on the way out) and a clamp-head upgrade where the existing body is fine but the clamp head needs swapping. For most other cases, the clamp head is the part to swap; the body stays. If you're not sure whether the stand body or the clamp head is the right replacement, the buying guide walks through the cam-versus-QR decision the body is built to carry either way: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43445522694188,"sku":"623251","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693.25_623251_image_1024.jpg?v=1737544314"},{"product_id":"adjustable-screw-for-clamp-1693-1-and-1693-1s-1693-21","title":"Adjustable screw for clamp 1693.1 and 1693.1S","description":"\u003cp\u003eThe Adjustable Screw 1693.21 is the threaded handle and screw shaft that dials in the jaw pressure on Unior's cam-style clamp heads: the 1693.1 and 1693.1S, in the older square-style jaw geometry with the 90 mm or 70 mm jaw height. Two cases bring shops to this part: a screw that's threaded out of tolerance after years of bike-to-bike pressure setting, and a clamp where the handle has been overtorqued and the screw has bent.\u003c\/p\u003e\n\u003cp\u003eThe cam-style clamp's pressure adjustment is a wear part by design. The lever closes the jaws against the pressure dialed in by the adjustable screw; over thousands of clamping cycles, the screw threads see the load and the wear shows up as a screw that doesn't seat at the same pressure for a given handle position. The 1693.21 replacement screw restores the clamp's pressure-setting precision without requiring a full clamp head replacement.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe 1693.21 fits the \u003cstrong\u003eolder square-style jaw clamp geometry\u003c\/strong\u003e on these clamp heads:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro Repair Clamp 1693.1S\u003c\/strong\u003e (manually adjustable cam-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarlier 1693.1 cam-style clamps\u003c\/strong\u003e with 70 mm or 90 mm jaw height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your clamp is the round-jaw Master Shop Clamp (1693.1M) or the quick-release Pro Shop Clamp (1693.1Q), this screw is not the right part. The Master Shop and Pro Shop use different pressure-setting mechanisms; the 1693.1Q has its own rebuild kit (1693.1Q-SP.1), and the 1693.1M's clamp pressure is dialed via a different threaded interface. One more check before ordering: from mid-2022 the 1693.1 and 1693.1S themselves moved to round-profile jaws (50 mm tall), and that generation takes the newer \u003ca href=\"\/products\/adjustable-screw-for-new-2022-clamp-1693-1-and-1693-1s-round-clamp-profile\"\u003e1693.23 adjustable screw\u003c\/a\u003e, not this one.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.21\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior cam-style clamp heads 1693.1 and 1693.1S with old square-style jaws (70 mm or 90 mm jaw height)\u003c\/li\u003e\n\u003cli\u003eFunction: adjustable pressure-setting screw for cam-style clamp mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e replacement adjustable screw with handle.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693.21 is a small part for a precise problem: the cam-clamp's pressure setting drifts over years of thumb-and-handle use, and the screw is the part that carries that drift. Replace the screw, the pressure precision comes back; the rest of the clamp stays in service.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eBefore you order the 1693.21, confirm your clamp's jaw geometry. The older square jaws are flat-faced and 70 mm or 90 mm tall; the newer round jaws (Master Shop, Pro Shop, and the mid-2022-onward 1693.1 and 1693.1S) are visibly cylindrical and shorter (50 mm to 70 mm). If your clamp has round jaws, the 1693.21 is the wrong part. For shops running multiple stand vintages, this is one of the small SKU-fitment calls that's worth getting right the first time. Replacing the screw on a working stand is one thing; upgrading the whole clamp head is another. The buying guide covers when each path makes sense: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":43526782320684,"sku":"629251","price":27.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693.21_629251_image_1024.jpg?v=1737544950"},{"product_id":"wall-or-bench-mounted-repair-stand-pro-shop-quick-release","title":"Wall or Bench Mounted Repair Stand Pro Shop Quick Release","description":"\u003cp\u003eWhen workshop space is the constraint, the repair stand goes vertical. The 1693.2Q Pro Shop Quick Release wall- or bench-mounted stand bolts to a wall stud or a benchtop and gives back the floor space a tripod stand consumes, without giving up the clamp quality the bike depends on. The Pro Shop QR variant adds the quick-release mechanism to the same mount geometry as the cam-style 1693.2S; the clamp head is the workflow difference, the body is the floor-savings difference.\u003c\/p\u003e\n\u003cp\u003eThe Pro Shop quick-release clamp opens and closes the jaws in one motion against a pre-set pressure, which on a wall-mount means the mechanic isn't reaching past a fixed mount post to re-adjust the clamp between bikes. The clamp pressure is dialed in once, the QR button works the open-and-close, and the bike-to-bike cadence stays in the same range as the floor-stand QR variants. The 22 to 60 mm tube range covers the full inventory mix without forcing a stand-side compromise.\u003c\/p\u003e\n\u003ch2\u003eHow it mounts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall-mounted:\u003c\/strong\u003e bolts into a stud (or a properly anchored plate at workshop height). Footprint outside the stud is zero; the stand swings into the work area only when in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench-mounted:\u003c\/strong\u003e bolts to a benchtop or a workshop fixture. The post stands up from the bench, the clamp swings free of the surface, and the bench underneath stays usable for parts trays and tool layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEither mount, the clamp sits at the same working height as a Pro-grade tripod stand without occupying the floor.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.2Q (code 627773)\u003c\/li\u003e\n\u003cli\u003eClamp: Pro Shop quick-release\u003c\/li\u003e\n\u003cli\u003eClamp tube range: Ø22–60 mm, any tube shape; envelope 120 × 239 × 313 mm, 4330 g\u003c\/li\u003e\n\u003cli\u003eHand-turned screw sets jaw opening and closed pressure (no wrench)\u003c\/li\u003e\n\u003cli\u003eMount hardware: not included; wall-stud or bench-fixture fasteners depend on your install surface\u003c\/li\u003e\n\u003cli\u003eBuilt from steel finished for workshop service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e wall- or bench-mount stand assembly, Pro Shop quick-release clamp head pre-installed with rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The wall- or bench-mount stand is one of the catalog's quieter answers; most shops reach for a tripod first, but the workshops that go vertical rarely go back. The 1693.2Q is Unior's quick-release wall- or bench-mount clamp; article 1693.2S (code 623225) is the adjustable-nut jaw on the same mount.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA wall- or bench-mount stand is the right answer when bench space and floor space are both tight and one has to give. The QR variant here is the configuration that matches a high-throughput small shop; for a small shop doing slower work (custom builds, frame service), the cam-style 1693.2S is usually the better fit because the cam clamp's pressure setting is more predictable across a long single-bike session. Both variants share the mount geometry; the choice is the clamp head, the same way it's the clamp head on the tripod stands. The trade-offs sit inside the broader stand-decision question: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tube sizes does the 1693.2Q clamp hold?\u003c\/strong\u003e The clamp grips tubes of any shape from Ø22 mm to Ø60 mm. That range is the official Unior spec for article 1693.2Q (code 627773).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I set clamp pressure on the 1693.2Q?\u003c\/strong\u003e An accessible screw changes the jaw opening and the pressure when the jaws are closed. Unior specifies that the screw turns by hand; you do not need a wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is 1693.2Q different from 1693.2S?\u003c\/strong\u003e 1693.2Q is the quick-release wall or bench mount clamp (code 627773). Unior's sibling article 1693.2S, code 623225, is the wall and bench jaw with an adjustable nut. Both are bench- or wall-mount options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the 1693.2Q dimensions, and how does it mount?\u003c\/strong\u003e It mounts to a bench or a wall. Official envelope is 120 mm (B) × 239 mm (A) × 313 mm (H) and 4330 g. Unior lists it for professional and home workshops.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Pro Shop Quick-Release","offer_id":44140728877100,"sku":"627773","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.2s-us.jpg?v=1642732200"},{"product_id":"replacement-clamp-jaw-covers-96mm","title":"Replacement Clamp Jaw Covers 96mm","description":"\u003cp\u003eReplaceable rubber jaw covers are the wear part on every Unior stand clamp; the rubber takes the daily grip-and-release work, picks up grit and frame cleaner residue, and eventually wears thin or tears at a corner. The 96 mm Replacement Clamp Jaw Covers (Unior 1693.11) are the cover size sized for the older \u003cstrong\u003esquare-style jaw geometry on cam-style 1693.1 \/ 1693.1S clamps with the 90 mm jaw height\u003c\/strong\u003e; the wider taller jaws found on long-serving cam clamps from the 1693 family's earlier production runs.\u003c\/p\u003e\n\u003cp\u003eWhen the rubber wears, you replace the rubber; the clamp itself stays. The covers slip onto the existing jaws without tools and lock into the same retention geometry the original factory covers used. The clamp goes from “showing its age” to “freshly bedded” in the time it takes to swap them in.\u003c\/p\u003e\n\u003ch2\u003eWhy fresh covers matter\u003c\/h2\u003e\n\u003cp\u003eA worn jaw cover doesn't grip the frame tube the way a fresh one does. The rubber compound is the surface that holds the bike under torque; once the rubber is glazed, hardened by frame cleaner, or torn through to the metal beneath, the clamp's hold on the bike is compromised. For carbon frames, an over-tightened clamp on worn covers is the failure mode that ends with a cored seat tube; for aluminum frames, it's the route to a clamp-shaped dent. Fresh covers protect both the bike and the clamp.\u003c\/p\u003e\n\u003ch2\u003eSizing: confirm before you order\u003c\/h2\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e96 mm cover\u003c\/strong\u003e for the older square-style cam-clamp jaw geometry. Two other cover sizes are available for different Unior clamp variants:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 mm covers\u003c\/strong\u003e fit the Pro Shop Clamp (1693.1Q) and the 70 mm-jaw variants of the 1693.1 \/ 1693.1S cam-style clamps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e57.2 mm covers\u003c\/strong\u003e fit the Master Shop Clamp (1693.1M) with the shorter round-jaw geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMeasure your existing covers (or the bare jaw, if your stand is running with a shop rag in place of covers) before ordering; the three sizes are not cross-compatible. The 96 mm cover is the right buy if your clamp has flat-faced square jaws that measure 90 mm tall.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.11 (96 mm variant)\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior cam-style 1693.1 \/ 1693.1S clamps with old square-style 90 mm jaws\u003c\/li\u003e\n\u003cli\u003eSold as: a pair (one set covers one clamp head)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e pair of 96 mm replacement rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The continued availability of the 96 mm cover for older cam-clamp jaws reflects Unior's long-service-life design assumption; cam-style clamps on shop walls from a decade ago still get rubber-cover service from the same SKU family. A stand bought in 2014 still gets its consumable parts in 2026.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eIf you're not sure whether your clamp uses the 96 mm cover or the 70 mm cover, the visual test is the jaw face: square-jaw clamps with a flat-faced rectangular profile and 90 mm jaw height use the 96 mm cover. Round-jaw or shorter-jaw clamps use a different cover. For shops running multiple clamp generations on the bench, keeping a small inventory of all three covers (70 mm, 96 mm, 57.2 mm) is the practical way to never get caught mid-job with a torn cover and the wrong size in stock. If you're choosing a new clamp head rather than recovering an old one, the buying guide compares the cam-style 1693.1S, the QR 1693.1Q, and the Master Shop 1693.1M directly: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":44140742082604,"sku":"621961","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.11.jpg?v=1642728454"},{"product_id":"replacement-clamp-jaw-covers-57-2mm-for-master-shop-clamp","title":"Replacement Clamp Jaw Covers 57.2mm for Master Shop Clamp","description":"\u003cp\u003eReplaceable rubber jaw covers are the wear part on every Unior stand clamp; the rubber takes the daily grip-and-release work, picks up grit and frame cleaner residue, and eventually wears thin or tears at a corner. The 57.2 mm Replacement Clamp Jaw Covers are the cover size sized for the \u003cstrong\u003eMaster Shop Clamp 1693.1M\u003c\/strong\u003e with the shorter round-jaw geometry; the e-bike-era clamp head Unior redesigned in 2021 around heavy-bike workshop reality.\u003c\/p\u003e\n\u003cp\u003eWhen the rubber wears, you replace the rubber; the clamp itself stays. The covers slip onto the existing round jaws without tools and lock into the retention geometry the Master Shop Clamp uses.\u003c\/p\u003e\n\u003ch2\u003eWhy this size fits the Master Shop Clamp\u003c\/h2\u003e\n\u003cp\u003eBikerumor's 2021 coverage of the Master Shop Clamp launch framed the design move directly: \u003cem\u003e“Unior has updated their premium repair clamp with a more rugged, more rigid design to work with modern bikes and heavy e-bikes. The narrow 5 cm round jaws with replaceable rubber covers should fit just about any bike, while clamping it securely.”\u003c\/em\u003e The 57.2 mm cover sits on those 5 cm round jaws; the older square-jaw clamps in the 1693.1 \/ 1693.1S family use the 96 mm cover, and the Pro Shop QR (1693.1Q) uses the 70 mm cover.\u003c\/p\u003e\n\u003ch2\u003eWhy fresh covers matter\u003c\/h2\u003e\n\u003cp\u003eA worn jaw cover doesn't grip the frame tube the way a fresh one does. On heavy e-bikes (the use case the Master Shop Clamp was redesigned for), this matters more: clamping pressure is higher, and a glazed or torn cover fails earlier under that load. For carbon frames, the failure mode is a cored seat tube; for aluminum, a clamp-shaped dent.\u003c\/p\u003e\n\u003ch2\u003eSizing: confirm before you order\u003c\/h2\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e57.2 mm cover\u003c\/strong\u003e for the Master Shop Clamp 1693.1M. Two other cover sizes exist for different Unior clamp variants:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 mm covers\u003c\/strong\u003e fit the Pro Shop Clamp (1693.1Q) and the 70 mm-jaw variants of the 1693.1 \/ 1693.1S cam-style clamps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 mm covers\u003c\/strong\u003e fit the older square-style cam-clamp jaws on the 1693.1 \/ 1693.1S with the 90 mm jaw height.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 57.2 mm cover is the right buy if your clamp is the Master Shop Clamp (round jaws, ~5 cm tall, fitted to the 1693EL Electric Repair Stand and sold standalone as the 1693.1M).\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.11 (57.2 mm variant for Master Shop Clamp)\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber\u003c\/li\u003e\n\u003cli\u003eCompatibility: Unior Master Shop Clamp 1693.1M (also fitted to 1693EL Electric Repair Stand)\u003c\/li\u003e\n\u003cli\u003eSold as: a pair (one set covers one clamp head)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e pair of 57.2 mm replacement rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Master Shop Clamp's round jaws and replaceable covers were part of the 2021 redesign that took the clamp from “shop floor general purpose” to “e-bike-era workshop standard”; the 57.2 mm cover is the sizing match for that design.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe Master Shop Clamp's covers see more load per clamping cycle than the older square-jaw covers because e-bikes are heavier and demand more pressure to hold. The service interval is faster on a Master Shop-equipped stand running heavy bikes than on a 1693.1S running road bikes; shops typically replace these every twelve to eighteen months in heavy e-bike service, versus every three to five years for a road-bike-only cam clamp. Shopping for the clamp head itself or the stand that carries it? The buying guide makes the e-bike-stand decision concrete: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"57.2mm for Master Shop Clamp","offer_id":44140742443052,"sku":"626337","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/products\/1693.11.jpg?v=1642728454"},{"product_id":"single-arm-professional-repair-stand-pro-shop-quick-release","title":"Single Arm Professional Repair Stand Pro Shop Quick-Release","description":"\u003cp\u003eThe Single Arm Pro Stand with the Pro Shop quick-release clamp is the workhorse single-arm shop stand fitted for high-throughput bike-to-bike workflow. Same 36 kg base-and-column mass under the same 30 kg working capacity as the manually adjustable variant; the difference lives in the clamp head. Squeeze the Pro Shop clamp's jaws by hand and they already grip the tube with enough force to hold the bike; a turn of the handle adds clamping tension, and the quick-release button opens the jaws once the handle is backed off. There is no jaw-width screw to re-dial, so a mechanic working through a service queue isn't resetting the clamp for every bike.\u003c\/p\u003e\n\u003cp\u003eFor a shop seeing twenty-plus bikes through the floor on a Saturday, the QR clamp is the working detail that pays back fastest. Back the handle off, press the quick-release button, and the bike is out; squeeze the jaws onto the next bike's seatpost and it is already held while the handle sets the final tension. Because the jaws take any tube shape from 22 to 60 mm straight off the squeeze, there is no jaw-opening adjustment between a kid's bike and a fat-tubed e-MTB.\u003c\/p\u003e\n\u003cp\u003eThe Single Arm Pro Stand body is a single column on a fixed base plate with 726 x 572 mm of floor contact; the design is conservative for a reason, and the 36 kg base-and-column mass is what makes the column stay vertical when a heavy bike loads it eccentrically. The clamp pressure on the QR is adjustable through the full range from “light grip on carbon” to “shop-grade hold on a wet aluminum tube”; the QR mechanism is mechanical (no electronics, no batteries) and built to outlast the rest of the shop fixtures.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693BQ (code 627769)\u003c\/li\u003e\n\u003cli\u003eStand combined weight (base + column): 36 kg\u003c\/li\u003e\n\u003cli\u003eWorking capacity: 30 kg\u003c\/li\u003e\n\u003cli\u003eClamp: Pro Shop quick-release, grips tubes of any shape from 22 mm to 60 mm; jaw height 70 mm clears short seatposts and dropper posts\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eSingle-arm column on a fixed base plate, height adjustable 985-1570 mm (about 1700 mm overall)\u003c\/li\u003e\n\u003cli\u003eSuited for shop and heavy home use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e fixed base plate, single column, Pro Shop quick-release clamp head pre-installed with rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Single Arm Pro Stand is one of the catalog items that hasn't needed redesign in a decade; the 36 kg base does its job, the column geometry has been refined over multiple production runs, and the Pro Shop QR clamp on top is the same head Unior fits to its quick-release BikeGator portable, and Unior states the clamp is compatible with all of its repair stands. What makes the Single Arm a shop stand rather than a portable is the base.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe Single Arm Pro Shop QR is what we recommend when a one-mechanic shop or a serious home builder asks for a stand that will outlast the building it's installed in. The 36 kg base is overkill for a one-bike home garage, but it's not overkill for a working mechanic; the column doesn't wobble under a hard pry on a stuck pedal, and the clamp doesn't slip on a wet seatpost. The QR-versus-cam decision is mostly about how often the stand sees a new bike: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the Pro Shop quick-release clamp hold and release a bike?\u003c\/strong\u003e Squeeze the jaws by hand — the quick-release system already grips the seatpost with enough force to hold the bike — then rotate the handle to apply the final clamping tension. To release, back the tension off with the handle first, then press the quick-release button and the jaws open.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tube sizes and shapes does the clamp accept?\u003c\/strong\u003e The jaws grip tubes of any shape from 22 mm to 60 mm in diameter, and the 70 mm jaw height works with short seatposts and dropper posts. Some bike manufacturers advise against clamping thin-walled carbon frames, so ask the bike maker for the recommended clamping point and clean the tube before clamping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall is the 1693BQ, and how much bike can it hold?\u003c\/strong\u003e The column adjusts between 985 mm and 1570 mm, topping out around 1700 mm overall, on a 726 x 572 mm fixed base plate. The stand itself weighs 36 kg and is rated for bikes up to 30 kg, which covers heavier bikes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does this stand ship, and what parts are replaceable?\u003c\/strong\u003e It ships as oversized freight: it is excluded from the free-shipping-over-$75 offer, and shipping is charged at carrier cost at checkout. The rubber jaw covers are a replaceable wear part (Unior item 1693.11), and the matching 1693.3-US tool tray is sold separately.\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Pro Shop Quick-Release","offer_id":44140744572972,"sku":"627769","price":599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693bq_627769_image_1024.jpg?v=1783969276"},{"product_id":"double-arm-professional-repair-stand-pro-shop-qr","title":"Double Arm Professional Repair Stand Pro Shop QR","description":"\u003cp\u003eThe Double Arm Pro Stand with the Pro Shop quick-release clamps is the high-volume shop's bench answer: two columns on one 56.5 kg base, two QR-equipped clamp heads, and a working capacity of 45 kg per arm. Two mechanics work back-to-back without crowding each other, the base doesn't move when one mechanic loads a heavy e-bike onto their column, and the QR clamps cut the per-bike adjustment time to a single motion.\u003c\/p\u003e\n\u003cp\u003eThe QR variant matters more on a double-arm than on a single-arm because the bench is sized for throughput. A two-mechanic shop floor seeing forty bikes through a Saturday is the use case the Double Arm Pro QR was built for: the mechanics aren't waiting on each other for floor space, and the QR clamps mean each mechanic's bike-to-bike cadence isn't constrained by clamp adjustment between bikes that share a pressure setting.\u003c\/p\u003e\n\u003cp\u003eThe Pro Shop quick-release clamp can grip tubes 22 to 60 mm in diameter, which covers the deep aero seatposts on TT bikes, the oversized top tubes on modern aero road bikes, and the 60 mm seatposts on most cargo e-bikes. The cam-style manually adjustable variant of the same Double Arm Pro stand caps at 24 to 40 mm; the QR variant's wider tube range is what lets the same bench handle a shop's full inventory mix without a stand-side compromise.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693C (Pro Shop QR variant)\u003c\/li\u003e\n\u003cli\u003eCombined base + column weight: 56.5 kg\u003c\/li\u003e\n\u003cli\u003eWorking capacity: 45 kg total\u003c\/li\u003e\n\u003cli\u003eClamp: Pro Shop quick-release × 2\u003c\/li\u003e\n\u003cli\u003eClamp tube range: 22–60 mm\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber jaw covers: Unior 1693.11\u003c\/li\u003e\n\u003cli\u003eTwo-column double-arm design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e double-arm base, two columns, two Pro Shop quick-release clamp heads pre-installed with rubber jaw covers.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Double Arm Pro is the bench fixture that gives a shop its full daily throughput without doubling the floor footprint of a second stand. The clamp heads are interchangeable with the rest of the Pro Shop family; if you've already stocked rubber jaw covers (Unior 1693.11) for another stand on the floor, the Double Arm uses the same covers and the same service interval.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA double-arm versus a second single-arm decision is mostly about floor flexibility. Two single-arm stands position independently, so two mechanics can work the same bike from opposite sides; a double-arm holds two bikes back-to-back, which is usually the higher-throughput configuration. If your shop alternates between “two mechanics on one bike” and “two mechanics on two bikes,” the double-arm is the wrong tool; if the second bike is always coming through the queue, the double-arm is exactly the right tool. The trade-offs sit alongside the QR-versus-cam clamp question here: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior","offers":[{"title":"Default Title","offer_id":44140746735660,"sku":"627771","price":824.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693cq_627771_image_1024.jpg?v=1783706152"},{"product_id":"electric-repair-stand-2-0","title":"Electric Repair Stand 2.0","description":"\u003cp\u003eA 28 kg road bike on a manual stand asks the mechanic to lift it to working height twice; the same mechanic lifts a 65 kg e-bike to the same height fifteen times a day, six days a week. The back math doesn't work. The Unior Electric Repair Stand 2.0 lifts that 65 kg bike for you at the press of a button, parks it at the working height the mechanic actually wants, and clears the next bike from the queue without a recovery break.\u003c\/p\u003e\n\u003cp\u003eThis is the second-generation Unior electric stand, redesigned around a one-piece aluminum column with all wiring routed internally. Stable, clutter-free, and rated to lift bikes up to 70 kg (700 N).\u003c\/p\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe 2.0 lifts the bike via an endless-height drive; no preset stops, no fixed-position pin. Press the button (or step the foot pedal) and the column travels until you release; the automatic stopping system holds position. A knob-controlled travel limiter with memory returns the mechanic to a most-used working height without re-measuring. A built-in load display reads the bike's weight at every lift; the safety system halts the column on overload.\u003c\/p\u003e\n\u003cp\u003eThe clamp is the Unior Master Shop Repair Clamp 1693.1M, the same clamp specified across Unior's pro repair-stand line. Anti-slip jaws hold carbon and aluminum frames without coring tubes.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-way control:\u003c\/strong\u003e button-panel and foot pedal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEndless height adjustment\u003c\/strong\u003e with adjustable travel limiters (memory function).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated LED light\u003c\/strong\u003e above the clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad display\u003c\/strong\u003e at every lift; \u003cstrong\u003eself-diagnosing fault codes\u003c\/strong\u003e during service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB ports\u003c\/strong\u003e (A and C) at the panel; optional Wi-Fi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden wiring:\u003c\/strong\u003e all cables routed internally through the aluminum column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaster Shop Repair Clamp 1693.1M\u003c\/strong\u003e anti-slip clamp interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed to floor\u003c\/strong\u003e or to the heavy-duty fixed plate (sold separately) with floor leveling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLoad capacity: 700 N (70 kg, ~154 lb).\u003c\/li\u003e\n\u003cli\u003eMaximum height: 1750 mm.\u003c\/li\u003e\n\u003cli\u003eLift travel range: 240 mm (lowest) to 1750 mm (highest), ~1510 mm of vertical adjustment.\u003c\/li\u003e\n\u003cli\u003eLift speed: 5 m\/min.\u003c\/li\u003e\n\u003cli\u003ePower: 0.32 kW; 24 V DC drive; 90–260 V AC input, 47–63 Hz (US and EU mains without configuration change).\u003c\/li\u003e\n\u003cli\u003eIP rating: IP30 (indoor use only).\u003c\/li\u003e\n\u003cli\u003eCE compliant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e Electric Repair Stand 2.0 column with integrated LED, control panel, foot pedal, Master Shop Repair Clamp 1693.1M, two-way cable harness. Base plate (628743) sold separately; required for floor-mount installations.\u003c\/p\u003e\n\u003ch2\u003eWho it pays back for\u003c\/h2\u003e\n\u003cp\u003eThe 2.0 is the right call for shops where the bench mechanic is lifting bikes more than ten times a day; high-volume retail service, e-bike-heavy service catalogs, and mechanics whose backs are starting to log the cost of repeated lifts. For a shop that turns four bikes a day and runs mostly road and gravel, a manual stand stays cost-justified.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 2.0 is the V2 generation of the stand; the aluminum column, the updated control board, and the protocol that pairs with the wireless remote (1693EL.20) and the Height Extension Kit (1693EL.11) are V2-only features. Full user-serviceability and published repair instructions carry over from Unior's hand-tool line.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe 2.0's value is in workflow, not in lifting power per se. The lift saves a few seconds per bike; the \u003cem\u003econsistent working height\u003c\/em\u003e saves an hour a week per mechanic by removing the small posture corrections that compound over a shift. The electric stand sits at the top of the workshop-stand decision tree; whether it pays back for your shop depends on the lift cadence more than on the catalog mix: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":44264151744556,"sku":"629761","price":2499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el_629760_image_1024-Square.jpg?v=1747217630"},{"product_id":"fixed-plate-for-two-electric-repair-stands-v2-0","title":"Fixed plate for two electric repair stands V2.0","description":"\u003cp\u003eThe Fixed Plate for Two Electric Repair Stands is the install option for shops running two 1693EL Electric Repair Stands in the same bay or along the same bench line. One plate, two stands, shared floor-leveling feet, and a footprint that lands smaller than two separate plates side-by-side. For high-volume retail service or e-bike-specialist shops scaling from a single-stand bay to a two-mechanic line, this is the plate that keeps the second stand's install as clean as the first.\u003c\/p\u003e\n\u003cp\u003eA shop running two electric stands typically has two mechanics working in parallel on adjacent bikes, with shared bench access to a tool wall and a parts tray between them. The shared plate keeps the column spacing consistent (a known offset between the two stands' clamp centers), which on a busy bench is the small detail that lets the parts and tools live in a known place between the two work zones. Floor leveling is shared too; the plate compensates for slab slope across both stand positions in a single install step.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the Unior Electric Repair Stand 1693EL line:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric Repair Stand 2.0\u003c\/strong\u003e (SKU 629761; V2, April 2021 onward).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric Repair Stand 1.0\u003c\/strong\u003e (V1, pre-April 2021).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMix-and-match is fine; the plate accepts one of each generation if a shop has a V1 and V2 side by side. The column-base bolt-pattern is unchanged across V1 and V2, so the plate's bolt-pattern works for both.\u003c\/p\u003e\n\u003ch2\u003eWhat's required to complete the install\u003c\/h2\u003e\n\u003cp\u003eThe plate ships as a standalone install accessory. To run the two-stand line, pair the plate with two Electric Repair Stands (sold separately). The plate's floor-leveling feet correct slab slope; for shops on permission-restricted lease floors, the plate sits free-standing and the stands' mass holds it down without floor anchors. For owner-occupied shops, the plate can be anchored through to the slab.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlate compatibility: Unior Electric Repair Stand 1.0 (V1) and 2.0 (V2)\u003c\/li\u003e\n\u003cli\u003eMount: two-stand bolt-pattern on a single steel plate\u003c\/li\u003e\n\u003cli\u003eLeveling: floor-leveling feet on plate underside\u003c\/li\u003e\n\u003cli\u003eCombine with: 2 × Electric Repair Stand 2.0 (SKU 629761) to complete a two-stand bench line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e two-stand plate with floor-leveling feet, mount hardware sized for the 1693EL column-base bolt-pattern.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The two-stand plate is the install accessory that scales the workshop the same way Unior scaled the hand-tool line into a stand line; one stand becomes two when the shop grows, and the install option for “two stands on one plate” is the catalog answer that doesn't ask the shop to rebuild the bay layout in the process.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe two-stand plate is the right call when a shop is committed to running two electric stands long-term and the bench layout is settled around them. For shops adding the second stand later or piloting whether two stands pay back, two separate single-stand plates is the more flexible interim install; the second stand can move to a different position without rebuilding the install. Once the layout is committed, the shared plate is the cleaner long-run install. Still deciding whether one electric stand is the right call before scaling to two? The buying guide walks the inflection point: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":44382614028332,"sku":"629855","price":387.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.22_629855_image_1024.jpg?v=1748437976"},{"product_id":"clamping-bracket-with-handle-for-clamp-for-1693el","title":"Clamping bracket with handle for clamp for 1693EL","description":"\u003cp\u003eA repair stand is only as good as its clamp, and the clamp is the part of the stand that absorbs every bike that has ever been mounted in it. On the Unior 1693EL Electric Repair Stand, the clamping bracket with handle is the assembly that carries that load and sets the clamp's position. This is the genuine replacement part, sold on its own.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e1693EL.12\u003c\/strong\u003e clamping bracket with handle, for the clamp on the Unior 1693EL Electric Repair Stand. A slotted body with flanged mounting holes and an integral handle, supplied as a service part so a damaged or worn bracket does not put the whole stand out of service.\u003c\/p\u003e\n\u003ch2\u003eWhen you need one\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe bracket is bent, cracked or has been over-torqued.\u003c\/li\u003e\n\u003cli\u003eThe handle no longer holds its setting under load.\u003c\/li\u003e\n\u003cli\u003eThe stand came to you second-hand with parts missing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA repair stand that has been in a busy shop for a few seasons has usually had at least one bike dropped into it harder than the clamp was expecting. This is the part that takes it.\u003c\/p\u003e\n\u003ch2\u003eWhy buy the genuine part\u003c\/h2\u003e\n\u003cp\u003eThe clamp assembly is a load path with a bike on the end of it, mounted at chest height, frequently over somebody's hands. A substitute bracket that is dimensionally close but not the same material specification is not a saving; it is the one component in the workshop where the failure mode is a frame hitting the floor. Order by part number.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the clamp on the Unior 1693EL Electric Repair Stand. Confirm your stand model before ordering; this bracket is specific to the 1693EL and is not shared with the mechanical stand range.\u003c\/p\u003e\n\u003ch2\u003eOther 1693EL parts and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1693el-11-height-extension-kit-for-1693el\"\u003eHeight Extension Kit for 1693EL (1693EL.11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fixed-tool-tray-for-1693el-1693el-7\"\u003eFrame mount tool tray for 1693EL (1693EL.7)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/folding-tool-tray-for-1693el-1693el-5\"\u003eFolding Tool Tray for 1693EL (1693EL.5)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/folding-small-parts-bin-holder-for-1693el-1693el-3\"\u003eFolding Small Parts Organizer for 1693EL (1693EL.3)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/remote-control-for-1693el-1693el-20\"\u003eRemote Control for 1693EL (1693EL.20)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. Keeping individual stand components on the parts list is what makes a capital purchase like an electric repair stand a ten-year asset rather than a five-year one.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eIf the clamp has taken a hit hard enough to need this bracket, inspect the clamp jaws and the mounting hardware at the same time. Impact damage rarely lands on one component in isolation, and the second failure always arrives at the least convenient moment. Our workshop guide covers stand selection and maintenance: \u003ca href=\"\/blogs\/tech-tips\/how-to-set-up-a-professional-bike-workshop\"\u003eHow to set up a professional bike workshop →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":44671302402092,"sku":"629166","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.12_629166_image_1024.jpg?v=1761849226"},{"product_id":"fixed-plate-for-1693el-new","title":"Fixed Plate for 1693EL","description":"\u003cp\u003eThe Unior \u003ca href=\"\/products\/electric-repair-stand-2-0\"\u003eElectric Repair Stand 2.0\u003c\/a\u003e mounts either directly to a level floor or to the heavy-duty Fixed Plate for 1693EL. The plate is the option that decouples the stand from the floor's flatness; for shops where the floor is concrete but pitched toward a drain, the plate's floor-leveling feet correct the stand's working position back to true vertical, and the stand reads dead-level under load.\u003c\/p\u003e\n\u003ch2\u003eWhat it does\u003c\/h2\u003e\n\u003cp\u003eA free-standing electric stand needs its working column dead-vertical for two reasons: the bike clamp holds the bike's centerline against gravity, and the column's internal travel mechanism wants the column normal to the bench's working plane. A concrete floor that's pitched 0.5° toward a drain (which most service-shop floors are, by code) shifts the stand's column off-vertical and works the column's bearing surfaces unevenly over time.\u003c\/p\u003e\n\u003cp\u003eThe Fixed Plate for 1693EL solves the leveling problem at the install rather than at the floor pour:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor-leveling function;\u003c\/strong\u003e adjustable feet on the plate's underside re-true the stand to dead-vertical regardless of the floor's slope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting bolt pattern;\u003c\/strong\u003e sized for the 1693EL stand's base bolt circle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable platform;\u003c\/strong\u003e the plate is heavy-duty steel, sized to anchor the stand without floor-mount anchors driven into the concrete itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen to add it\u003c\/h2\u003e\n\u003cp\u003eTwo install scenarios where the fixed plate is the right choice:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-shop floor with a code-required drain slope.\u003c\/strong\u003e Most service-bay floors slope 0.25″–0.5″ per foot toward a drain (US code) or have a similar metric-spec slope. The fixed plate re-trues the stand without touching the slope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLease-floor install\u003c\/strong\u003e where drilling into the concrete is not allowed. The plate sits on the floor surface, gets weighted with the stand and a bike, and stays put without floor anchors.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor shops on a level floor with concrete-drilling permission, mounting the 1693EL directly to the floor is the lower-cost path; the plate becomes optional.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: Unior Electric Repair Stand 2.0 (SKU 629761) and the prior-generation Fixed Plate Electric Repair Stand 1693EL.\u003c\/li\u003e\n\u003cli\u003ePlate dimensions: 740 × 740 × 12 mm.\u003c\/li\u003e\n\u003cli\u003ePlate-only mass: ~45 kg.\u003c\/li\u003e\n\u003cli\u003eLeveling: floor-leveling feet for uneven-floor compensation.\u003c\/li\u003e\n\u003cli\u003eMount: bolt-pattern sized for the 1693EL base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequired for:\u003c\/strong\u003e complete floor-mount install of the Electric Repair Stand 2.0 when direct-to-concrete mounting is not the chosen path. Without either the plate or a floor anchor, the stand has no stable base.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The Fixed Plate is part of the same in-house manufacturing line as the Electric Repair Stand 2.0; the steel stock is finished to match the workshop-black powder coat on the stand, and the plate's leveling feet share the workshop-grade thread tolerance the rest of Unior's stand accessories carry.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eThe plate-vs-floor-anchor decision usually comes down to permission, not preference. Owner-occupied shops typically drill the floor and skip the plate; leased shops typically buy the plate. The plate also has the side benefit of being relocatable; if the bench layout changes a year into the install, the plate moves with the stand and the slab stays untouched. Buyers still deciding whether the electric stand itself is the right call should read the buying guide first; the plate is a downstream install decision: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":45406585061420,"sku":"640026","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.1_628743_image_1024.jpg?v=1775053137"},{"product_id":"adjustable-screw-for-new-2022-clamp-1693-1-and-1693-1s-round-clamp-profile","title":"Adjustable screw for NEW (2022) clamp 1693.1 and 1693.1S (round clamp profile)","description":"\u003cp\u003eThe 1693.23 is the adjustable screw for Unior's Pro repair clamps: the threaded spindle assembly that sets how far the jaws open and how hard they close on a frame tube. Unior lists it as the replacement adjuster for both current clamp heads, the auto-adjustable 1693.1 and the manually adjustable 1693.1S. On the manual clamp it is the screw you turn at every tube-diameter change, so when the threads stop holding a setting, or the spindle picks up a bend from an overtorqued handle, a new screw puts the clamp back to spec without replacing the whole head.\u003c\/p\u003e\n\u003cp\u003eThis is the newer of the two adjustable screws Unior makes for these clamps. From mid-2022 the 1693.1 and 1693.1S moved to round-style clamping jaws, 50 mm tall, and the adjustable screw changed with the jaws. Unior lists this version, code 629253, for the round-jaw clamps only.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe 1693.23 fits the round-jaw generation of both Pro repair clamp heads:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/pro-repair-clamp-auto-adjustable\"\u003ePro Repair Clamp, Auto Adjustable 1693.1\u003c\/a\u003e, round-style jaws, mid-2022 onward\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/pro-repair-clamp-manually-adjustable\"\u003ePro Repair Clamp, Manually Adjustable 1693.1S\u003c\/a\u003e, round-style jaws, mid-2022 onward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your clamp has the older square-style jaws, 70 mm or 90 mm tall, it takes the \u003ca href=\"\/products\/adjustable-screw-for-clamp-1693-1-and-1693-1s-1693-21\"\u003e1693.21 adjustable screw\u003c\/a\u003e instead. And if the clamp on your stand is the Master Shop 1693.1M or the quick-release Pro Shop 1693.1Q, neither screw applies: those clamps use different pressure mechanisms, and the 1693.1Q has its own \u003ca href=\"\/products\/set-of-spare-parts-for-1693-1q-1693-1q-sp-1\"\u003erebuild kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eHow to tell which screw you need\u003c\/h2\u003e\n\u003cp\u003eLook at the jaws, not the stand. Round-profile jaws 50 mm tall mean a mid-2022-or-later clamp and this screw, the 1693.23. Flat-faced square-style jaws at 70 mm or 90 mm mean the earlier clamp and the 1693.21. The two generations of clamp look close to identical from across a workshop, and so do the two screws, so a quick ruler check against the jaw height settles it before you order.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticle number: 1693.23\u003c\/li\u003e\n\u003cli\u003eUnior code: 629253\u003c\/li\u003e\n\u003cli\u003eFits: 1693.1 and 1693.1S Pro repair clamps with round-style clamping jaws (50 mm, mid-2022 onward)\u003c\/li\u003e\n\u003cli\u003eNot for: square-style jaws (70 mm or 90 mm tall; use the 1693.21) or the 1693.1M and 1693.1Q clamps\u003c\/li\u003e\n\u003cli\u003eWeight: 150 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The 1693.23 is that thinking applied to a wear point: the adjuster that carries the clamp's daily use is available on its own, so a hard-working clamp head stays in service instead of being replaced.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eCheck the jaw height before you order, even if you know when you bought the stand. Clamp heads get swapped between stands in busy workshops, and the mid-2022 changeover means two stands bought months apart can take different screws. Round jaws at 50 mm: this screw. Square jaws at 70 or 90 mm: the 1693.21. And if the clamp head itself is tired, weigh an upgrade instead of a repair: \u003ca href=\"\/blogs\/tech-tips\/how-to-choose-a-bike-repair-stand\"\u003eHow to choose a bike repair stand →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich clamps does the 1693.23 adjustable screw fit?\u003c\/strong\u003e It fits Unior's Pro repair clamp heads 1693.1 (auto adjustable) and 1693.1S (manually adjustable) built from mid-2022 onward, the versions with round-style clamping jaws 50 mm tall. Unior lists it as the replacement adjuster for both models under code 629253.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know whether my clamp needs the 1693.23 or the 1693.21?\u003c\/strong\u003e Check the jaws. Round-profile jaws about 50 mm tall mean a mid-2022-or-later clamp, which takes this screw, the 1693.23. Flat-faced square-style jaws 70 mm or 90 mm tall mean the earlier generation, which takes the 1693.21 instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 1693.23 fit the Master Shop 1693.1M or Pro Shop 1693.1Q clamps?\u003c\/strong\u003e No. The 1693.1M and 1693.1Q use different pressure-setting mechanisms, so neither the 1693.23 nor the 1693.21 applies to them. The 1693.1Q has its own rebuild kit, sold separately as the 1693.1Q-SP.1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the adjustable screw do on the clamp?\u003c\/strong\u003e It is the threaded spindle that sets the jaw opening and the closing pressure. On the manually adjustable 1693.1S you turn it to match the frame tube before closing the lever. A worn or bent screw is why a clamp stops holding its pressure setting, and replacing it restores the clamp without a new head.\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":45902538965036,"sku":"629253","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693.23_629253_image_1024.jpg?v=1785873437"},{"product_id":"engine-with-gearbox-for-1693el","title":"ENGINE WITH GEARBOX FOR 1693EL","description":"\u003cp\u003eENGINE WITH GEARBOX FOR 1693EL\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":46078774640684,"sku":"629859","price":144.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.23_629859_image_1024.jpg?v=1788441115"},{"product_id":"drive-shaft-for-1693el","title":"DRIVE SHAFT FOR 1693EL","description":"\u003cp\u003eDRIVE SHAFT FOR 1693EL\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":46078774706220,"sku":"629860","price":42.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.24_629860_image_1024.jpg?v=1788441291"},{"product_id":"lower-electronics-for-1693el","title":"LOWER ELECTRONICS FOR 1693EL","description":"\u003cp\u003eLOWER ELECTRONICS FOR 1693EL\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":46078774771756,"sku":"629861","price":229.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.25_629861_image_1024.jpg?v=1788441399"},{"product_id":"power-supply-for-1693el","title":"POWER SUPPLY FOR 1693EL","description":"\u003cp\u003ePOWER SUPPLY FOR 1693EL\u003c\/p\u003e","brand":"Unior USA","offers":[{"title":"Default Title","offer_id":46078774804524,"sku":"629862","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/files\/1693el.26_629862_image_1024.jpg?v=1788441485"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/5786\/5260\/collections\/1693bs-us.jpg?v=1778587720","url":"https:\/\/uniorusa.com\/collections\/repair-stands.oembed?page=4","provider":"Unior USA","version":"1.0","type":"link"}