Repair Stands & Accessories

Take your home maintenance to the next level with a rock-solid foundation. Our repair stand collection ranges from the portable BikeGator+ — perfect for small garages and race days — to professional floor-mounted and electric-lift stands for heavy e-bikes. Whether you need a simple wall-mount option or a full shop setup with integrated tool trays and laptop holders, these bicycle tools provide the stability you need to work safely and comfortably on any bike in your fleet.

Read the bike repair stand guide

Which Unior repair stand is right for you?

  • Portable and compact

    The BikeGator folds to a duffel-bag-sized footprint and sets up without tools. At 5.7 kg it carries a 30 kg working load, which covers every road, gravel, or hardtail you are realistically traveling with. When the stand has to disappear between jobs or pack into a race vehicle, this is the one.

    Bike Gator Portable Repair Stand 

  • High-volume home or shop

    The Single Arm Pro delivers a stable, full-height workshop stand with a Pro Shop Quick-Release clamp. The floor-mount variant strips the base plate for permanent installs where that footprint is better used elsewhere. Either way the column, height adjustment, and jaw covers are the same workshop-grade hardware.

    Single Arm Pro Repair Stand, Floor Mount 

  • E-bike and heavy bikes

    The Electric Repair Stand 2.0 lifts bikes up to 70 kg (700 N) at the press of a button, with no preset stops across 240 mm to 1,750 mm of vertical travel. Built around a one-piece aluminum column with internal wiring and the Master Shop Repair Clamp. IP30 indoor use; accepts US 120 V and EU 230 V mains without reconfiguration.

    Electric Repair Stand 2.0 

How the Unior repair stands compare

StandTypeClamp / mountBest forPrice
Bike Gator Portable – 1693AS0-USPortable, foldingCam-style jaw clampTravel, events, home garages where storage matters$279.99
BikeGator+ Auto Adjustable – 1693A-USPortable, folding – premiumAuto-adjusting jaw clampRace-day primary or high-throughput shop secondary$436.99
Single Arm Pro, Floor Mount – 1693BS1-USFixed column, floor-anchoredPro Shop Quick-Release clampPermanent workshop installs where floor area is limited$398.99
Pro Road Stand – 1693RFrame-support, fork/BB cradleBottom-bracket cradle, no tube clampThru-axle road, gravel, and aero-seatpost bikes$479.99
Electric Repair Stand 2.0Motorized column, fixed or plate-mountMaster Shop Repair Clamp, 50 mm round jawsE-bikes and heavy bikes; high-volume shops; back-to-back service$2,499.99

Bike repair stand FAQs

How do I choose a bike repair stand?

Start with where the stand will live and how it will travel. A portable stand that folds and packs is the right tool for a race mechanic or a home garage with limited storage. A fixed-column stand bolted to the floor is the right tool for a workshop that runs bikes through it every day. If you service e-bikes or heavy bikes regularly, a motorized column removes the lifting entirely. Clamp type, whether cam-style, quick-release, or frame-cradle, depends on the bike's tube geometry and how quickly you need to swap bikes in and out.

What weight capacity do I need in a repair stand?

A fully-equipped trail hardtail runs about 12–15 kg; a carbon road bike under 8 kg; a full-suspension enduro bike 14–18 kg; a full-power e-MTB 22–25 kg. The BikeGator folds to a 30 kg working load, which covers every conventional bike. The Electric Repair Stand 2.0 is rated to 70 kg (700 N), which covers virtually every bicycle on the US market including loaded cargo e-bikes. Margin matters: a stand operated at its rated limit flexes more and wears faster than one operated well inside it.

Can I use a regular clamp repair stand on a road bike with thru-axles and aero tubes?

Cam-style and quick-release clamp stands grip a round tube: the seatpost, down tube, or chain stay. Most modern road bikes have an integrated-cable down tube and an aero or oversized seatpost that a standard jaw was not sized for. The Pro Road Stand sidesteps this by supporting the bike at the bottom-bracket area rather than clamping a tube, leaving the frame geometry untouched. If a thru-axle adapter is needed for fork-mount fitment, Unior offers the 1693R.2 adapter for the Pro Road Stand.

Is the Unior Electric Repair Stand compatible with my shop's power supply?

Yes. The Electric Repair Stand 2.0 accepts 90–260 V AC at 47–63 Hz, which covers US 120 V/60 Hz and EU 230 V/50 Hz mains without any configuration change or adapter. The control system runs at 24 V DC internally. The stand's IP30 rating means it is designed for indoor workshop use; it is not rated for outdoor or wet-environment service.

What is the difference between the BikeGator and the BikeGator+?

Both are portable folding stands from the 1693 family. The base BikeGator (1693AS0-US) covers home and travelling-mechanic use at a lower price. The BikeGator+ steps up with a refined sliding system, precision aluminum and steel components, an auto-adjusting jaw clamp option, and a metal tool tray with interchangeable SOS foam insert. The Plus models are built for the portable stand that becomes a shop secondary or a race-day primary used through back-to-back service days.