General Shop Tools - Ratchets, Sockets, and Bits
Certain tasks can be finished much quicker with a ratchet vs. a...
General Shop Tools - Files, Reamers, and Taps
Mangled threads don’t mean throwing away a frame or a component. In...
General Shop Tools - Pliers
From side cutters to linesmen’s pliers to cable cutters, there’s a number...
General Shop Tools - Wrenches
Even if you can’t immediately think of a situation in which you’d...
General Shop Tools - Measurement
Need to measure a seatpost diameter? We’ve got you covered. How about...
General Shop Tools - Screwdrivers
From adjusting derailleur limit screws to securing a reflector, the necessity of...
General Shop Tools - Hammers, Punches, Chisels
Pounding in star-fangled nuts, venting frustration at stuck seatposts, installing crown races...
1/4" Drive Metric Hex Bit - 187/2HX
Perfectly paired with our Torque Wrench, these 1/4" drive hex bits come in...
$4.99
Learn moreRight Pedal Insert - 10 Pack - 1695.3A
For use with our reaming pedal taps, this thread insert is held...
$74.99
Learn moreCrank Saver Kit - 1695MB1-US
Unior's Crank Saver Kit (1695MB1-US) is an all-in-one solution for salvaging otherwise...
$299.99
Learn moreLeft Pedal Reaming Tap - 1695.1AL
Mate this reaming tap to our Handle for Pedal Taps and save those stripped...
$47.99
Learn moreLeft Pedal Insert - 10 Pack - 1695.4A
For use in conjunction with our reaming pedal taps, this thread insert...
$74.99
Learn moreRight Pedal Reaming Tap - 1695.1AR
Mate this reaming tap to our Handle for Pedal Taps and save...
$47.99
Learn more1/4" Drive Torx Bit - 187/2TX
Perfectly paired with our new Electronic Torque Wrench, these 1/4" Torx bits...
$4.99
Learn moreHandle for Pedal Taps - 1695/4BI-US
This tap handle is designed to work with our pedal taps, and it...
$38.99
Learn moreScrew Grabbing Pliers - 407/4DP-US
Put away the drill and screw extractors. Unior's new 407/4DP Screw Grabbing...
$43.99
Learn more8/10mm Flare Nut Wrench - 183/2
Almost a necessity when working with compression nuts on hydraulic lines, the...
$9.99
Learn more7x8mm Open End Combination Wrench - 110/1
The perfect tool for bleeding Shimano hydraulic brakes! Shimano uses both 7mm...
$6.99
Learn more3m/10ft Tape Measure - 710R-US
Metric tape measures are surprisingly difficult to come by here in the...
$6.99
Learn morePhillips Screwdriver - 613VDETBI
What's there to say about a cross tip screwdriver? A bit, actually....
$9.99
Learn moreForged Ratcheting Combination Wrench - 160/2
This is something we've been wanting to bring to the USA for...
$22.99
Learn more3/8" Drive Metric Hex Bit - 236/2HX
It's a hex bit socket. It has a 3/8" square drive. Those...
$11.99
Learn moreElectronic Torque Wrench - 266B
Take the guesswork out of setting your vernier-style torque wrench with Unior's...
$339.99
Learn moreMetric Hex Screwdriver - 620VDETBI
Versatility is the name of the game. Maybe our T-handles aren't the...
$14.99
Learn moreAdapter for Sockets - 238.7/1
You've got a ratchet or a torque wrench with one drive size...
$5.99
Learn moreStrap Wrench - 1705/2DP-US
Got a rear shock air can to unthread? Or a shock that...
$29.99
Learn moreSide Cutters - 461/1VDEBI
Side cutters, dikes, diagonal cutters, wire cutters, nippers, whatever you want to...
$31.99
Learn moreMagnetic Parts Bowl - 2086
Next time you're rebuilding a shifter, replacing a stem, or working on...
$14.99
Learn moreBastard Cut Flat File with Handle - 760HB-US
For those times you need to deglaze a brake pad, de-burr a...
$11.99
Learn moreRound File with Handle - 763HB-US
Sometimes you need to modify parts to make them work. With as...
$12.99
Learn moreAdjustable Pin Spanner Wrench - 253/2DP-US
Certain cup-and-cone bottom brackets, Mavic hubs, and more all can be adjusted...
$32.99
Learn morePro Socket Handle - 190.8/2BI-US
Sometimes, especially for the traveling mechanic, carrying a traditional ratchet is overkill....
$17.99
Learn moreFrame Taps - 1695
Threads sometimes need cleaning up. Overspray from the factory, crash damage, there...
$10.99
Learn moreSlipper Torque Wrench - 264
Modern bikes are made of modern materials and a result of squeezing...
$144.99
Learn morePedal Tap Set - 1695.1
Unlike our reaming pedal taps, these taps don't remove existing threads...
$71.99
Learn moreAwl, Straight Tip - 639A
So. Many. Uses. This 165mm straight awl is the perfect poking tool....
$7.99
Learn moreBit Holder for Ratchets - 188.9
Let’s say you’ve got a cache of 1/4″ hex shank bits, as...
$6.99$5.99Torx Screwdriver - 621/1TBI
If you love our Metric Hex Screwdrivers you'll love these! Our same...
$16.99
Learn moreFlat Chisel - 660/6-US
Everyone should have a good chisel and punch in their tool kit,...
$22.99
Learn moreFlat Bladed Screwdriver - 603VDETBI
What's there to say about a flat bladed screwdriver? A bit, actually....
$9.99
Learn moreCeramic Saw Blades - 750.1CAR
When you're cutting carbon fiber with a hacksaw you can certainly use...
$22.99
Learn moreInternal Snap Ring Pliers, Bent Jaw - 538PLUS/1DP-US
There are two types of retaining rings, or circlips, internal and external....
$29.99
Learn moreDigital Vernier Caliper 0-150mm - 270A
Let's assume you're working on a bike that keeps coming back because...
$89.99
Learn moreVernier Caliper - 271
A Digital Vernier Caliper is a precision instrument and easily damaged, which...
$55.99
Learn moreAdjustable Wrench - 250/1
Some mechanics will cringe. Others will realize how useful of a tool...
$23.99
Learn moreScissors - 582/3P-US
Having to write a product description for scissors is surprisingly difficult. There's...
$32.99
Learn moreIRONGATOR Bench Vise - 721Q/6-US
Cutting a steerer? You'll want a vise. Shortening a bolt? You'll want...
$479.99
Learn moreHacksaw Blades, 2-pack - 750.1B
Not a lot to say about these hacksaw blades aside from listing...
$10.99
Learn moreJaw Covers for Slip Joint Pliers - 449.1
Made to fit over the jaws of our 449/1PYTHON-US Slip Joint Pliers,...
$4.99
Learn moreAdjustable Parallel Jaw Pliers - 449/1PYTHON-US
A quick glance and one might assume these are no different than...
$59.99
Learn moreInternal Snap Ring Pliers - 536PLUS/1DP-US
There are two types of retaining rings, or circlips, internal and external....
$29.99
Learn moreLong Needle Nose Pliers - 508/1VDEBI
These are a longer version of the other straight needle nose pliers we...
$34.99
Learn moreAdjustable Box Joint Pliers - 447/1VDEBI
Maybe you're in a situation where our parallel-jaw pliers aren't going to...
$54.99
Learn moreAwl, Big S-Bend Tip - 639C
So. Many. Uses. This pick is the perfect poking tool. Open up...
$8.99
Learn moreAwl, 90 Degree Tip - 639B
So. Many. Uses. This pick is the perfect poking tool. Open up...
$8.99
Learn morePin Punch - 641/6
A handy 3mm pin punch. Made in Europe of chrome-vanadium steel according...
$32.99
Learn more