Set of tools in tray 1 for 2600A-US or 2600C-US

A shop’s general-tools drawer is the one a mechanic opens at the start of every service ticket and closes at the end. T-handle hex wrenches, screwdrivers, a digital caliper, cable cutters, an awl; the tools that don’t belong to a specific service category but get reached for at the start of every job. The SET1-2600AC tray for the Unior 2600A and 2600C workbenches bundles those everyday tools into one foam-cut bench drawer.

What’s in the tray

• T-handle hex wrench (193HX-US); the everyday metric hex range from 2 mm through 10 mm.
• TX-profile screwdriver with T-handle (193TX-US); T-handle Torx, the daily-driver Torx format.
• Digital caliper (270A); for measuring component dimensions, axle diameters, BB cup OD, rotor thickness, and the dozens of “what size is this” moments in a service ticket.
• Diagonal cutting nippers (461/1VDEBI); VDE-rated insulated handles, for cable trim and zip-tie removal.
• Cable housing cutters (584/4BI-US); clean cuts on derailleur and brake housing without crushing the inner liner.
• Electrician’s screwdriver with VDE-rated insulated blade (603VDETBI); flat-blade, insulated to the VDE TBI standard.
• Crosstip (PH) screwdriver with VDE-rated insulated blade (613VDETBI); Phillips, insulated to the same standard.
• Awl with round, double-bent blade (639C); for cable routing pickup and gasket placement.
• Measuring tape (710R-US); for chain length, cable length, and bike-fit reference dimensions.

The tray ships with the empty foam shell (VL1-2600AC); replacement shells available separately.

Why the tray exists

A general-tools tray solves the most common drawer-finding problem in a workshop: the tools mechanics need first getting buried under the tools they need later. The T-handle hex, the screwdrivers, the cable cutters, and the digital caliper all want to be in the top drawer of the bench cabinet, not the bottom. SET1-2600AC is sized for that top-drawer slot; pull the tray, the everyday tools are visible at a glance.

For shops needing the drivetrain-specific tools alongside the everyday tray, the SET2-2600AC Drivetrain Tools tray is the natural companion. For wheel work, SET3-2600AC; for torque and precision sockets, SET4-2600AC.

Compatibility

Sized for the bench-integrated 990WD7 drawer in the Unior 2600A and 2600C workbenches. Also fits the standalone 990WD7 wide tool chest for shops running the cabinet without the bench.

Built in Zreče, Slovenia

Unior has been forging hand tools in Zreče, Slovenia, since 1919, and is the official technical partner of multiple World Tour and downhill teams. The VDE-insulated screwdrivers in this tray are certified to the German industrial-tool insulation standard; service safety isn’t a marketing claim, it’s a process-spec built into the tool.

Pro tip from our mechanics

SET1-2600AC is the tray every Unior bench loadout should include. The everyday-tools-first principle compounds across years of service tickets; the alternative (mechanics walking across the shop for the third Phillips screwdriver of the morning) wears mechanics down faster than the work itself. Our broader workshop-setup guide covers the day-one tray-purchase sequence: How to set up a professional bike workshop →