Bleedkit.com Workshop Gold Mineral Oil Master Bleed Kit

A shop that services mineral-oil hydraulic brakes runs into three brand families on a busy weekend: Shimano on the road and MTB bikes, Magura MT on the trail-bike rotation, and Tektro / TRP on the gravel and entry-level builds coming back for warranty service. Most kits cover one of those families well and the others poorly, which is why the bench ends up with two or three boxes stacked on a shelf, each missing something. The Workshop Gold Mineral Oil Master Bleed Kit collapses those three boxes into one. It carries the Shimano flat-bar block, the Shimano drop-bar block, the Magura MT blocks, the brass M5-to-M6 adapter for Tektro and TRP, and the dropbar brass adapter for the Dura-Ace through Tiagra road levers in pre-2026 form.

What's in the kit

The kit's lever-side hardware is a 30 ml transparent funnel with brass M5 thread, paired with a 20 ml Luer-slip funnel for the Magura MT side. Both threaded plugs are stainless steel with a hanger so the funnel stops sit visibly off-bench during a bleed. The caliper side uses a 20 ml TPX syringe with a long-lasting tube and a stainless-steel insert that guides into the bleed nipple cleanly. The kit also includes brass M5-to-M6 adapter hardware for Tektro / TRP, a brass dropbar adapter for the Shimano road levers, and a Magura M6 brass fitting.

Compatibility

The Master Mineral Oil kit fits every Shimano hydraulic brake from the XTR / XT / Saint / Zee / SLX / Deore / Alivio / Acera / Alfine / Metrea flat-bar range through the pre-2026 drop-bar Dura-Ace / Ultegra / 105 / GRX / Tiagra series. It fits all Magura MT brakes (MT4, MT5, MT7, MT8 and the MT trail variants). It fits all Tektro and TRP hydraulic flat-bar brakes. It does not fit the 2026 Shimano R9300 / R8270 drop-bar levers, which use the new M7 funnel thread; an M7 adapter is sold separately when Bleedkit.com's workshop replacement ships. The kit is mineral-oil only and will not service SRAM DOT systems or Formula Cura.

Specs

• Funnel: 30 ml transparent, brass M5 thread (Shimano + Tektro / TRP)
• Magura funnel: 20 ml Luer-slip
• Caliper syringe: 20 ml TPX with long-lasting tube
• Wrenches included: 7 mm, Torx T25, Torx T15
• Spare O-rings: 5 pcs
• Made by Bleedkit.com (Ljubljana, Slovenia)

Includes: all funnel and syringe hardware listed above, blocks for Shimano flat-bar 2/4-piston and drop-bar, Magura MT blocks, M5-to-M6 brass adapter for Tektro / TRP, Shimano dropbar brass adapter, rubberised one-side hook and loop strap (25 cm), bleed-block clamps, and the spare O-ring set.

Built in Ljubljana, since 2011

Bleedkit.com has been building bleed kits sized per brake system in Ljubljana, Slovenia since 2011, and is distributed in North America by Euro Toolworks alongside the Unior cycling-tool catalog. Unior has been forging hand tools in Zreče since 1919, and is the official technical partner of multiple World Tour and downhill teams. The Workshop Master kit is the Bleedkit.com SKU built for the bench where a single mineral-oil drawer handles every brand of brake that comes through the stand on the same morning.

Pro tip from our mechanics

The drawer-sort routine that keeps this kit fast on the bench is fluid-type first, then funnel-thread second. Mineral oil stays in one drawer with this kit, the Magura funnel laid alongside it; DOT fluid lives in a different drawer entirely. The contamination boundary that matters most isn't between brands, it's between fluid chemistries; a clean rag between jobs handles the inside-drawer transitions.

Which kit fits which 2026 lever generation, including the R9300 / R8270 M7 thread and the Maven Bronze 5.0 mm block, is in our compatibility walk-through: Which bleed kit fits Shimano R9300, Ultegra R8270, and SRAM Maven Bronze →