Fixed plate for two electric repair stands V2.0

The Fixed Plate for Two Electric Repair Stands is the install option for shops running two 1693EL Electric Repair Stands in the same bay or along the same bench line. One plate, two stands, shared floor-leveling feet, and a footprint that lands smaller than two separate plates side-by-side. For high-volume retail service or e-bike-specialist shops scaling from a single-stand bay to a two-mechanic line, this is the plate that keeps the second stand's install as clean as the first.

A shop running two electric stands typically has two mechanics working in parallel on adjacent bikes, with shared bench access to a tool wall and a parts tray between them. The shared plate keeps the column spacing consistent (a known offset between the two stands' clamp centers), which on a busy bench is the small detail that lets the parts and tools live in a known place between the two work zones. Floor leveling is shared too; the plate compensates for slab slope across both stand positions in a single install step.

Compatibility

Fits the Unior Electric Repair Stand 1693EL line:

• Electric Repair Stand 2.0 (SKU 629761; V2, April 2021 onward).
• Electric Repair Stand 1.0 (V1, pre-April 2021).

Mix-and-match is fine; the plate accepts one of each generation if a shop has a V1 and V2 side by side. The column-base bolt-pattern is unchanged across V1 and V2, so the plate's bolt-pattern works for both.

What's required to complete the install

The plate ships as a standalone install accessory. To run the two-stand line, pair the plate with two Electric Repair Stands (sold separately). The plate's floor-leveling feet correct slab slope; for shops on permission-restricted lease floors, the plate sits free-standing and the stands' mass holds it down without floor anchors. For owner-occupied shops, the plate can be anchored through to the slab.

Specs

• Plate compatibility: Unior Electric Repair Stand 1.0 (V1) and 2.0 (V2)
• Mount: two-stand bolt-pattern on a single steel plate
• Leveling: floor-leveling feet on plate underside
• Combine with: 2 × Electric Repair Stand 2.0 (SKU 629761) to complete a two-stand bench line

Includes: two-stand plate with floor-leveling feet, mount hardware sized for the 1693EL column-base bolt-pattern.

Built in Zreče, Slovenia

Unior has been forging hand tools in Zreče since 1919, and is the official technical partner of multiple World Tour and downhill teams. The two-stand plate is the install accessory that scales the workshop the same way Unior scaled the hand-tool line into a stand line; one stand becomes two when the shop grows, and the install option for “two stands on one plate” is the catalog answer that doesn't ask the shop to rebuild the bay layout in the process.

Pro tip from our mechanics

The two-stand plate is the right call when a shop is committed to running two electric stands long-term and the bench layout is settled around them. For shops adding the second stand later or piloting whether two stands pay back, two separate single-stand plates is the more flexible interim install; the second stand can move to a different position without rebuilding the install. Once the layout is committed, the shared plate is the cleaner long-run install. Still deciding whether one electric stand is the right call before scaling to two? The buying guide walks the inflection point: How to choose a bike repair stand →