Holder for T-handle Hex wrenches

The dedicated home for a T-handle hex set. Sized cutouts on a steel face, marked 2 mm through 10 mm, sized to seat the Unior 193HX T-handle hex range so each wrench drops straight in by shank diameter. The holder mounts on a benchtop or hangs on a Unior bench/wall panel, and the labeled positions give the kit a fixed home so the missing wrench is visible at a glance.

A T-handle set is a fast-pace shop tool; spreading wrenches across a drawer or a tote turns the speed advantage into a hunt-and-retrieve problem on every bolt. The point of a dedicated holder is the return trip, not the grab. Put a wrench back in the wrong slot in a drawer and you'll cost yourself twenty seconds the next time you reach for it; the labeled cutouts here make the return automatic.

Compatibility

Sized for the Unior 193HX T-handle hex wrench family across the bike-relevant metric span:

• 2 mm: derailleur limit screws on most current Shimano and SRAM mechanical groupsets
• 2.5 mm: disc-brake caliper banjo bolts on some hydraulic systems
• 3 mm: older shifter and brake-lever pinch bolts
• 4 mm: stem face-plate bolts, brake-lever clamps, bottle-cage bolts
• 5 mm: stem steerer-clamp bolts, seatpost binders, saddle-rail bolts
• 6 mm: disc-brake caliper-mount bolts
• 8 mm: pedal threads from inside, square-taper crank-fixing bolts
• 10 mm: Campagnolo crank-spindle bolts, some older bottom-bracket interfaces

Specs

• Labeled positions across the 2 mm to 10 mm range to seat the Unior 193HX T-handle hex wrenches
• Steel construction, black finish
• Mounts on a benchtop or onto a Unior bench/wall panel
• SKU: 629622

Built in Zreče, Slovenia

Unior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The holder's black finish matches the other Unior bench-organization accessories (hex holders, Torx holders, screwdriver racks), so a bench panel populated with multiple holders reads as one workspace rather than a parts collection.

Pro tip from our mechanics

The 5 mm hex is the rotor-bolt-equivalent for the hex side; it gets pulled from the rack a dozen times a day for stem clamps, seatpost binders, and saddle-rail work. The labeled cutout makes its absence obvious from across the bench. The HX holder pairs naturally with the TX holder when a shop runs both T-handle hex and T-handle Torx sets on the same bench panel.

For the broader trade-offs between L-shape, T-handle, Y-handle, and three-way formats, and the sizes that need a long-arm L-key for high-torque pulls beyond a T-handle's range: Hex and Torx wrenches: how to pick the right tool for the job →.