SKU: 73-021-034-0
Sinter Model 021 - Magura MT5-7 - BLUE s530
Sinter Model 021 - Magura MT5-7 - BLUE s530
Sinter Model 021 organic replacement pads for Magura MT5 and MT7 calipers. As organic pads they send less heat into the caliper than sintered pads, give more feedback at the lever and wear the rotor less. This listing is Blue s530, Sinter's fade-resistant, long-life compound for e-bikes, heavy bikes and long descents.
You save $7.00
Unit price perIn stock
Couldn't load pickup availability
Free US shipping on orders $75+
Some exceptions apply — see shipping policy
Founded in 1969, Sinter makes brake pads in Ljubljana, Slovenia.

On this page
This listing is the Sinter 021 pad for Magura MT5 and MT7 brakes in one compound, Blue s530. Sinter developed Blue for constant braking power, high modulation and slow wear across all temperature conditions, and recommends it for e-bikes, heavier bikes and long descents.
What's in the kit
Two pads, left and right, plus Sinter's bedding-in card. That is one caliper's worth; the other caliper needs its own set if it takes the same shape.
Fits
Sinter lists the 021 shape for these Magura brakes:
- Magura MT5
- Magura MT5e
- Magura MT5eStop
- Magura MT7
- Magura MTHeight
- Magura MTNext
Magura uses more than one pad shape across its range, and Sinter makes another shape for some of these same brakes, so don't go by the brake's name alone. Set a worn pad beside the photo on this page and compare the outline, the mounting tab and the pin hole; a number stamped on the old pad is a useful cross-check. If you're still unsure, send us a photo and we'll confirm the fit.
Compound and feel
Blue s530 combines carbon and Kevlar fibres with metal and ceramic particles. The fibre mix keeps it fade resistant and stable at every temperature, and the particles add friction and wear resistance, which gives the compound its extra-long pad life. Sinter points it at long alpine descents, bike-park laps and e-MTBs, which makes it our pick for an MT5 or MT7 on an e-bike or one that works hard on enduro and downhill.
The metal particles don't turn it into a metallic pad. Despite the name, Sinter only makes organic, resin-bonded pads, and Blue keeps the organic feel. Compared with sintered pads, organic pads send less heat into the caliper, give more feedback at the lever and wear rotors less, and they run quietly once bedded in. On Sinter's in-house BTM-11 dynamometer, Blue s530 showed up to 44% higher friction coefficient than the competitor pads it was compared with.
Choosing your compound
Despite the name, every Sinter compound is organic — not a sintered-metal pad. Organic pads run cooler at the caliper, give more lever feel and modulation, stay quiet, and are gentler on your rotors. The color of the backing plate tells you the compound.
Red s514
The all-round upgrade from OEM. Consistent performance, smooth modulation and lever feel, excellent durability.
Black s550
Long-wearing organic compound. Predictable braking across temperatures in all conditions, including mud and wet.
Green s2032
Sinter's race compound. A state-of-the-art material for braking aggressively while keeping ultimate power and control across temperatures.
Blue s530
For e-bikes, DH and Enduro. Consistent power with high modulation, lever comfort and slow wear across all temperatures.
Our pick for this brake
Also in the Sinter range: the Cargo pad, built for cargo bikes and heavy daily city loads.
Specs
- Pad code: SINTER 021 (Magura MT5-7)
- Compound: Blue s530
- Material: organic, resin-bonded
- Pads per set: 2, left and right
- Made in: Ljubljana, Slovenia
Includes: 2 pads (left and right), bedding-in card.
Pro tip from our mechanics
You don't have to run one compound at both ends. Sinter notes that many trail riders fit Green s2032 at the front for bite and Blue s530 at the rear for durability and control. For gravity riding it pairs Blue front and rear, for long periods of secure braking with good modulation. Both compounds come in this 021 shape, and the Sinter Model 021 Magura MT5-7 page lists the other compounds.
How Blue compares with Sinter's other compounds, and which suits the way you brake: How to choose Sinter brake pads →
FAQ
Which Magura brakes does the 021 pad in Blue s530 fit? Sinter lists the 021 shape for the Magura MT5, MT5e, MT5eStop and MT7, and also for the MTHeight and MTNext. Magura has other pad shapes, and Sinter makes another shape for some of these brakes too, so compare a worn pad with the photo on this page (outline, mounting tab, pin hole) or send us a photo and we'll confirm it.
Blue s530 contains metal particles. Does that make it a sintered pad? No. Despite the brand name, Sinter only makes organic, resin-bonded brake pads. Blue s530 adds metal and ceramic particles to its carbon and Kevlar fibres for wear and fade resistance, and Sinter says it keeps the organic feel. Compared with a sintered metal pad it sends less heat into the caliper, gives more feedback at the lever and wears the rotor less.
How do I bed in Blue s530 pads? Clean and degrease the rotor and find a traffic-free stretch. Brake 20 times from 10 mph (15 km/h) down to about 3 mph (5 km/h), then 10 times harder from 15 mph (25 km/h), then twice hard from 20 mph (30 km/h), each time down to the same slow speed and never locking the wheel. That lays an even film of pad material on the rotor. Sinter's bedding-in card shows the same steps.
The new Blue pads won't go into my Magura caliper. What should I do? The pistons moved out as the old pads wore, so the gap is now too narrow for full-thickness pads. Take the old pads out and press the pistons evenly back into the caliper with a piston spreader or a clean flat plastic tool, then fit the new pads. The same happens if the lever is squeezed while the wheel is out, so leave it alone until the wheel is back in.
Tech Tips
Disc Brake Pad Bedding In Procedure