Sinter Model 006 Avid

Avid Elixir and the SRAM XX / X0 / X7 / X9 / DB / Level family share a pad pocket, and the current SRAM AXS road levers (Red AXS, Rival AXS, Force AXS in the flat-mount two-piece geometry) use the same shape. The Sinter Model 006 is the organic-compound replacement for that pad pocket. It's the SRAM equivalent of the Shimano-side Model 018: one pad shape that covers a wide cross-section of current and recent SRAM hydraulic brakes.

What's in the kit

One caliper's worth of pads (2 pads, left and right) for the Elixir / DB / Level / AXS pocket. The kit ships with the spring, pin, and bedding-in instructions. Order two kits if you're replacing front and rear pads in the same service.

Fits

Elixir / DB / Level / AXS pad shape, covering this SRAM and Avid range:

• SRAM XX, X0, X7, X9
• SRAM DB (the budget hydraulic line)
• SRAM Level T, TL (entry- and mid-tier two-piston MTB)
• SRAM Red AXS (flat-mount two-piece)
• SRAM Rival AXS (flat-mount two-piece)
• SRAM Force AXS (flat-mount two-piece)
• Avid Elixir 1, 3, 5, 7, XX, X0

For SRAM road riders on AXS hydraulic, this is the pad on the flat-mount two-piece calipers (Red, Rival, Force in the 2019–current generation). For MTB riders, this covers the lower- and mid-tier 2-piston SRAM platform, plus all of the Avid Elixir hydraulic family.

Compound and feel

Sinter's organic ceramic-loaded compound runs quiet, bites cleanly off the lever, and stays predictable in the wet. For the SRAM-side calipers that Model 006 covers, that compound is more refined than the original-equipment SRAM pad it replaces. Road riders on AXS hydraulic will notice the modulation specifically; the compound was tuned around short, hard inputs that road braking creates. MTB riders on Level or older XX / X0 / X9 calipers will get a longer useful pad life from the resin matrix than from many of the OE pads that came stock on these brakes.

Specs

• Compound: organic (ceramic-loaded, resin-bound)
• Backing plate: steel
• Pad shape: Avid Elixir / SRAM DB / Level / AXS flat-mount
• Pads per package: 2 (one caliper)
• Includes spring and pin

Includes: 2 pads (left and right), spring, pin, bedding-in instructions.

Sinter's Slovenian metallurgy

Sinter has been making friction materials in Ljubljana since 1969, and developed the first disc brake pads in the former Yugoslavia in 1972; the company was among the first in Europe to ship asbestos-free pads in 1986. Unior has been forging hand tools in Zreče since 1919, and is the official technical partner of multiple World Tour and downhill teams. The Model 006 is the high-volume SRAM pad in the Sinter catalog; the breadth of SRAM brake systems sitting behind a single pad shape is part of why one Sinter model number does so much work.

Pro tip from our mechanics

SRAM Red AXS and Rival AXS flat-mount calipers are two-piece; the caliper body splits across the pad pocket; and the pad install needs the bridge bolt at the correct torque to keep the pocket geometry square. Use a torque wrench at SRAM's published spec (usually 5 to 7 Nm depending on the model year); over-tight bridge bolts on flat-mount AXS calipers have been known to misalign the pad pocket and cause uneven pad wear on the first ride.

For the broader compound primer and fitment grid, see How to choose Sinter brake pads →.