SKU: 73-011-063-7

Sinter Model 011 - Hayes - GREEN s2032

Sinter Model 011 - Hayes - GREEN s2032

Skip to product information
1 of 1

Sinter Model 011 pads for Hayes Prime brakes in Green s2032, the racing compound for late, hard braking. Ceramic particles give high initial bite and Kevlar fibres resist wear and heat, and Sinter describes its braking as silent. Like all Sinter pads they are organic; the set is two pads, a spring and a bedding-in card.

Regular price $29.49 USD
Regular price $36.99 USD Sale price $29.49 USD

You save $7.50

20% off Sold out
Shipping calculated at checkout.

In stock

Free US shipping on orders $75+

Some exceptions apply — see shipping policy

Ships from Ballston Spa, NY
Shop Pay installments available

Founded in 1969, Sinter makes brake pads in Ljubljana, Slovenia.

Share

View full details
On this page

This listing is the Sinter Model 011 pad for Hayes Prime brakes in Green s2032, Sinter's racing compound, made for riders who brake late and hard. The same shape comes in Red s514 and Blue s530 as separate listings.

What's in the kit

One set is a left and a right pad, a spring and Sinter's bedding-in card: enough for one caliper. Brakes at both ends need a set each, and the two don't have to be the same compound (see the pro tip below).

Fits

Sinter's name for this pad is Hayes Prime, and its fitment list for the 011 shape has one Hayes brake system on it, the Prime series. Every compound Sinter makes in this shape fits the same way, so choosing Green is about how you ride, not the caliper.

Before you order, compare a worn pad's outline and mounting tab with the photo here, or, if the worn pad is a Sinter, check for 011 printed on its backing plate. If you're not sure, send us a photo of the old pad and we'll take a look.

Compound and feel

Green s2032 is a soft compound. Ceramic particles give it a high initial bite for precise braking, and Kevlar fibres give it wear and temperature resistance. Friction-coefficient enhancers and a tailored resin give it what Sinter calls silent braking. Sinter built s2032 for extreme braking performance across varied temperatures, so a rider can brake aggressively and keep control on any surface.

That puts it on steep, technical descents and in gravity and road racing. Despite the name, Sinter only makes organic pads, so even the race compound is bonded in resin and sends less heat into the caliper than a sintered pad would.

Choosing your compound

Despite the name, every Sinter compound is organic — not a sintered-metal pad. Organic pads run cooler at the caliper, give more lever feel and modulation, stay quiet, and are gentler on your rotors. The color of the backing plate tells you the compound.

Red s514

The all-round upgrade from OEM. Consistent performance, smooth modulation and lever feel, excellent durability.

Black s550

Long-wearing organic compound. Predictable braking across temperatures in all conditions, including mud and wet.

Green s2032

Sinter's race compound. A state-of-the-art material for braking aggressively while keeping ultimate power and control across temperatures.

Blue s530

For e-bikes, DH and Enduro. Consistent power with high modulation, lever comfort and slow wear across all temperatures.

Our pick for this brake

This listing is the Model 011 in Green s2032, Sinter's racing compound for riders who brake late and hard, which Sinter says gives the sharpest initial bite. Three of the four compounds above are sold here in the 011 shape. Many trail riders pair a Green front pad with Blue s530 at the rear for durability and control; for everyday all-round riding, Sinter's pick is Red s514.

Also in the Sinter range: the Cargo pad, built for cargo bikes and heavy daily city loads.

Specs

  • Pad code: Sinter 011
  • Shape: Hayes Prime
  • Compound: Green s2032 (soft, organic, resin-bonded)
  • Pads per set: 2, left and right (one caliper)
  • Made in: Ljubljana, Slovenia
  • Manufacturer SKU: 73-011-063-7

Includes: 2 pads (left and right), spring, bedding-in card.

Tested in Sinter's brake lab

Sinter was founded in 1969 and makes its pads in Ljubljana, Slovenia. When ENDURO Mountain Bike Magazine ran its disc brake test in Sinter's brake lab, Green s2032 was compared with the original pads on eight brake systems from eight brands. On average, braking from 30 to 15 km/h took 18% less time, brake torque rose 18%, and the discs ran 6% cooler.

Pro tip from our mechanics

Sinter notes that many trail riders run Green at the front for bite and Blue at the rear for durability and control. Both come in this 011 shape, so this set can go on the front caliper and Blue s530 on the rear. For gravity riding, Sinter pairs Green at both ends for the sharpest bite, or Blue at both ends for long bike-park days.

Matching a compound to your brake and your riding, step by step: How to choose Sinter brake pads →

FAQ

Will the Green s2032 Model 011 fit my Hayes brake? Sinter lists one Hayes brake system for the 011 shape: the Hayes Prime series. Sinter makes other Hayes shapes under different model numbers, so check the old pad first. Compare its outline and mounting tab with the photo on this page, or, if it is a Sinter, look for 011 printed on its backing plate. Not sure? Send us a photo and we'll confirm the fit.

Green s2032 is a race compound. Is it a sintered pad? No. Despite the name, Sinter only makes organic, resin-bonded pads, and Green s2032 is a soft organic mix with Kevlar fibres and ceramic particles. Sinter's case for organic pads is less heat passed into the caliper, more feedback at the lever, less rotor wear and quiet running once bedded in.

Do the Green s2032 pads need bedding in before I ride hard? Yes, Sinter says to bed new pads in before riding hard. Degrease the disc, then on a traffic-free stretch make 20 stops from 15 km/h (10 mph), 10 harder stops from 25 km/h (15 mph) and two hard stops from 30 km/h (20 mph), slowing to 5 km/h (about 3 mph) each time without locking the wheel.

The new pads won't fit between the pistons. What should I do? In our experience the pistons have moved out as the old pads wore. With the wheel out and the old pads already removed, press the bare pistons straight back. Next time, you can spread them against the old pads before those come out. Use a flat, blunt tool, push evenly, and follow the brake maker's manual where it names a method.

Worn black disc brake pads and a gold caliper retaining pin set on a metal workshop bench before bedding-in Tech Tips Disc Brake Pad Bedding In Procedure

Get 10% off your first order

Plus Tech Tips guides and new-tool news, straight from the bench. No spam.